This is a test. I hope it makes it to the network!
-=]Spitfire of Reign of Fire BBS. JoinLink RetroNet C=Net and FidoNet. Multi-Terminal Support: ANSI Ascii and Skypix! For both 40/80 Columns.
--- CNet/5
* Origin: Reign Of Fire: rofbbs.cnetbbs.net:2300 / (931)494-9100
This is a test. I hope it makes it to the network!
-=]Spitfire of Reign of Fire BBS. JoinLink RetroNet C=Net and FidoNet. Multi-Terminal Support: ANSI Ascii and Skypix! For both 40/80 Columns.
--- CNet/5
* Origin: Reign Of Fire: rofbbs.cnetbbs.net:2300 / (931)494-9100
Necromaster of necrobbs.strangled.net port 23 and port 40Cool, message made it out from RoF, let me know if your get this for RetroNet :)
figured out my issue. It was a strange find. I am putting a packet together right now that has Bucko's binkd instructions along with the Amibinkd add on. This comes with screens of the important areas and a working config that just needs editing to fit your needs.
BTW, my isse was my inbound path was DH3:Echomail/Inbound
The path is should have made it work RoFBBS:Echomail/Inbound
DH3 and RofBBS are the same directory drive under WinUAE. Keep that in mind when your editing the paths in the Amibinkd.cfg !!!
Necromaster of necrobbs.strangled.net port 23 and port 40
figured out my issue. It was a strange find. I am putting a packet together right now that has Bucko's binkd instructions along with the Amibinkd add on. This comes with screens of the important areas and a working config that just needs editing to fit your needs.
BTW, my isse was my inbound path was DH3:Echomail/Inbound
The path is should have made it work RoFBBS:Echomail/Inbound
Jeez.. I told you it was something stupid. LOL glad it is working now!!
I'm
happy for you..
On Wed 20-Mar-2019 5:52p, Bucko@80:774/70.0 said to Spitfire:
Jeez.. I told you it was something stupid. LOL glad it is working now!! I'm
happy for you..
Well, its not 100% but its getting there. Seems there is an
issue with WinUAE and AmiBinkd, but its not far from stable! Thanks to Necromaster for his hard work.
-Spitfire of Reign of Fire BBS. JoinLink RetroNet C=Net FidoNet ArakNet.
I read about the issue on FW2.. I have seen something like the issue you are
having but I can't understand why it is doing it..It's not like you are outside the Amiga, it's all inside WinUAE and you are not doing anything
in
Windows.. I'm at a loss here.
Well, so far I am getting your replies. Thats always a good thing. The last few days I seen your replies on other boards, but not here.
Well I am glad for that!! At least it shows it is working then... I did notice something in your doc file that was I think amiss.. In the Tosser configuration there is nothing set in the Alternate attachment directory. Not
sure if it will matter but K-Guide told me to make sure my outbound directory
was in it. Not sure if that was a Windows thing to him or not.
You know with all the changes I made here, I can not remember
who said that was not needed and to leave it blank. Good eye on looking over what I added. Its not the greatest, but it is a good start.
It's more then a good start it works! That is all that matters.. We just need
to find out the issue with having to reboot every day..
--- Mystic BBS v1.12 A43 2019/03/03 (Windows/32)
* Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (80:774/70)
I found out that I never installed AmiTCP. Carlos was wondering where it was.
((shrugging)) I dunno....what's that? lol
I had considered installing MiamiDX but never got around to it. lol
I found out that I never installed AmiTCP. Carlos was wondering where it was. ((shrugging)) I dunno....what's that? lol
I had considered installing MiamiDX but never got around to it. lol
The reasone C-net will use the normaly FTN Outbound folder to build the .FLO files unless there is an ALT Path set. Then it will use the ALT
path value in the .FLO
The reason you need to use the Alt-Path is becase your mailler is BinkD and is on Windows so it needs a different path then what C-net Toss uses which is from FTN Outbound. Because ROF is now using AmiBinkD both the mailer and tosser can use the same path in the .FLO files.
[+] K-Guide
27 Mar 05:32:04 [127894400] session closed, quitting...
27 Mar 05:32:05 [127894400] rc(129519464)=0
? 27 Mar 05:32:05 [127894400] cannot opendir Rofbbs:Echomail: Undefined error: 0
27 Mar 05:32:06 [127894400] the queue is empty, quitting...
Every now and then I get the above error. Not sure what is causing it. I am not going to reset and see what my log says later today.
K-Guide made a script over at FW2 that will now moniter the AmiBinkD server and re-start it if its not running. I just installed
the script and made the changes. Read the Amibinkd.log and it says it started. I will be monitoring the log to see how many times it has to restart.
Good to hear things are really working well now.. Hopefully, you can put together a package with everything and K-Guide can include it with C-Net releases.. This way it will make it easier for the new sysOp to get hooked into the Networks...
I sent your docs (PDF) and added my docs and more screens to it and put them in a archive and already sent them to K-Guide. He already installed it on his. So with all that info, he said he would have a install. All we needed to do is add the echo to the message base.
| Sysop: | Nelgin |
|---|---|
| Location: | Plano, TX |
| Users: | 416 |
| Nodes: | 10 (0 / 10) |
| Uptime: | 43:21:14 |
| Calls: | 6,177 |
| Calls today: | 2 |
| Files: | 15,718 |
| Messages: | 752,095 |
| Posted today: | 3 |