Hello All!

There is a new Gossiped release 2.0.0

Just installed it, and was wondering a bit.
It now comes as DEB or RPM.
I installed the deb, and it creates a /etc/gossiped/ directory.

But it does NOT default to load this config /etc/gossiped/config.yml if no parameter is given.

I was expecting that "gossiped" without parameters would default to this config file:
/etc/gossiped/config.yml

Also when I enter an empty area, it says "empty area" and exits.
What if I want to write a message into an empty area ... currently not possible.

CU, Ricsi

--- gossipEd-linux/amd64 2.0.0-50-5782c1eb
* Origin: https://github.com/askovpen/gossiped/ (2:310/31)

Hello Richard Menedetter!

I also could not save with F2
I pressed ESC and the menu offered me save ... but F2 did not work.

10 Jan 20 14:50:18, Richard Menedetter wrote to All:

Hello All!

There is a new Gossiped release 2.0.0

Just installed it, and was wondering a bit.
It now comes as DEB or RPM.
I installed the deb, and it creates a /etc/gossiped/ directory.

But it does NOT default to load this config /etc/gossiped/config.yml if no parameter is given.

I was expecting that "gossiped" without parameters would default to this config file:
/etc/gossiped/config.yml

Also when I enter an empty area, it says "empty area" and exits.
What if I want to write a message into an empty area ... currently not possible.

CU, Ricsi

--- gossipEd-linux/amd64 2.0.0-50-5782c1eb
* Origin: https://github.com/askovpen/gossiped/ (2:310/31)

CU, Ricsi

--- gossipEd-linux/amd64 2.0.0-50-5782c1eb
* Origin: https://github.com/askovpen/gossiped/ (2:310/31)

Hello Richard Menedetter!

10 Jan 20 14:51:18, Richard Menedetter wrote to Richard Menedetter:

I also could not save with F2
I pressed ESC and the menu offered me save ... but F2 did not work.

But it does NOT default to load this config /etc/gossiped/config.yml if no parameter is given.
Also when I enter an empty area, it says "empty area" and exits.
What if I want to write a message into an empty area ... currently not possible.

will be in 2.0.1.

Alexander


--- ════════╦╦═╦╦═╗╔════
* Origin: ═╩══╬╩═╩╩═╬╬═ (2:5020/9696.128)

will be in 2.0.1

It's nice to see new releases of GossipEd. The last time I tried to compile it on or for the Raspberry Pi I had no success. Would it be possible to add an 32bit ARM v7 build to the next release?

* Origin: kakistocracy (2:280/464.47)

Hi Alexander!

10 Jan 2020 22:20, from Alexander N. Skovpen -> Richard Menedetter:

I also could not save with F2

But it does NOT default to load this config

will be in 2.0.1.

Thanx!!

CU, Ricsi

... It's so complicated, with the flowers, the romance, and the lies upon lies --- GoldED+/LNX
* Origin: ------------ Out of Order ------------- (2:310/31)

Hello Alexander N. Skovpen!

10 Jan 20 22:20:08, Alexander N. Skovpen wrote to Richard Menedetter:

I also could not save with F2
I pressed ESC and the menu offered me save ... but F2 did not work.

But it does NOT default to load this config /etc/gossiped/config.yml if no parameter is given.
Also when I enter an empty area, it says "empty area" and exits.
What if I want to write a message into an empty area ... currently not possible.

will be in 2.0.1.

F2 works again, but it still did not find the config.yml file.

CU, Ricsi

--- gossipEd-linux/amd64 2.0.2-50-19956109
* Origin: https://github.com/askovpen/gossiped/ (2:310/31)

Hello Richard Menedetter!

12 Jan 20 19:56:12, Richard Menedetter wrote to Alexander N. Skovpen:

I also could not save with F2
I pressed ESC and the menu offered me save ... but F2 did not work.

But it does NOT default to load this config /etc/gossiped/config.yml if no parameter is given.
Also when I enter an empty area, it says "empty area" and exits.
What if I want to write a message into an empty area ... currently not possible.

will be in 2.0.1.

F2 works again, but it still did not find the config.yml file.

try this paths:

"/usr/local/etc/ftn/gossiped.yml",
"/etc/ftn/gossiped.yml",
"gossiped.yml",

Alexander


--- ════════╦╦═╦╦═╗╔════
* Origin: ═╩══╬╩═╩╩═╬╬═ (2:5020/9696.128)

Hi Alexander!

12 Jan 2020 23:51, from Alexander N. Skovpen -> Richard Menedetter:

F2 works again, but it still did not find the config.yml file.

try this paths:
"/usr/local/etc/ftn/gossiped.yml",
"/etc/ftn/gossiped.yml",
"gossiped.yml",

Thanx!

CU, Ricsi

... When you are in it up to your ears, keep your mouth shut!
--- GoldED+/LNX
* Origin: Support your right to keep and arm bears! (2:310/31)

Hi, Alexander!

On Sun, 12 Jan 2020 23:51:28 +0200 Alexander N. Skovpen writes:

[...]

F2 works again, but it still did not find the config.yml file.

try this paths:

"/usr/local/etc/ftn/gossiped.yml",
"/etc/ftn/gossiped.yml",
"gossiped.yml",

How about to be more classical and honor at least ~/.gossiped.yml (and $XDG_CONFIG_HOME as a bonus? https://specifications.freedesktop.org/basedir-spec/basedir-spec-0.6.html)

--- Gnus/5.13 (Gnus v5.13) Emacs/24.5 (gnu/linux)
* Origin: Somewhere in the North (2:4500/1.59)

Hello Alexander N. Skovpen!

Thanx for the update!

TZUTC seems to work fine.

BTW when I try to reply to an empty area, then I get a stack dump.

CU, Ricsi

--- gossipEd-linux/amd64 2.0.3-50-13c584e8
* Origin: https://github.com/askovpen/gossiped/ (2:310/31)

"/usr/local/etc/ftn/gossiped.yml",
"/etc/ftn/gossiped.yml",
"gossiped.yml",

How about use ~/.gossipedrc as usual in Linux system?
It make possible using "-c" (config option) as optional parameters.
In my option is more Linux way to use GossipEd reader.

--- Golden/LNX 1.2.0 2020-01-05 18:29:20 MSK (master)
* Origin: Yo Adrian, I Did It! (c) Rocky II (2:5023/24.3752)

Hello Vitold Sedyshev!

13 Jan 20 02:34:58, Vitold Sedyshev wrote to Alexander N. Skovpen:

"/usr/local/etc/ftn/gossiped.yml",
"/etc/ftn/gossiped.yml",
"gossiped.yml",

How about use ~/.gossipedrc as usual in Linux system?
It make possible using "-c" (config option) as optional parameters.
In my option is more Linux way to use GossipEd reader.

$ echo $PATH
/home/mike/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin

$ cat /home/mike/bin/gossiped
#!/usr/bin/bash
. /etc/fido_profile
/usr/bin/gossiped $BASEDIR/etc/gossiped/config.yml

Michael


--- gossipEd-linux/amd64 2.0.3-50-13c584e8
* Origin: Пожилой фидошник (2:5020/1042.3)

F2 works again, but it still did not find the config.yml file.

try this paths:

"/usr/local/etc/ftn/gossiped.yml",
"/etc/ftn/gossiped.yml",
"gossiped.yml",

How about to be more classical and honor at least
~/.gossiped.yml (and $XDG_CONFIG_HOME as a bonus? https://specifications.freedesktop.org/basedir-spec/basedir-spec
-0.6.h tml)

I think dot files in the home dir root (~/) should be not encouraged anymore. But I also feel ~/.config/gossiped/gossiped.yml would be the right place for the config file.

* Origin: kakistocracy (2:280/464.47)

Hi, Oli!

On Mon, 13 Jan 2020 14:19:20 +0100 Oli writes:

F2 works again, but it still did not find the config.yml file.

try this paths:

"/usr/local/etc/ftn/gossiped.yml",
"/etc/ftn/gossiped.yml",
"gossiped.yml",

How about to be more classical and honor at least
~/.gossiped.yml (and $XDG_CONFIG_HOME as a bonus?
https://specifications.freedesktop.org/basedir-spec/basedir-spec
-0.6.h tml)

I think dot files in the home dir root (~/) should be not encouraged anymore. But I also feel ~/.config/gossiped/gossiped.yml would be
the right place for the config file.

That is the default XDG path, IIUC, right?


--- Gnus/5.13 (Gnus v5.13) Emacs/26.1 (gnu/linux)
* Origin: Belarus FTN IP network (2:4500/1)

Hello Richard Menedetter!

12 Jan 20 21:58:18, Richard Menedetter wrote to Alexander N. Skovpen:

BTW when I try to reply to an empty area, then I get a stack dump.

why you reply in empty area? :-) will be fixed

Alexander


--- ════════╦╦═╦╦═╗╔════
* Origin: ═╩══╬╩═╩╩═╬╬═ (2:5020/9696.128)

Hello Vitold Sedyshev!

13 Jan 20 02:34:58, Vitold Sedyshev wrote to Alexander N. Skovpen:

How about use ~/.gossipedrc as usual in Linux system?
It make possible using "-c" (config option) as optional parameters.
In my option is more Linux way to use GossipEd reader.

use -h or --help as unix-way :-)

Alexander


--- ════════╦╦═╦╦═╗╔════
* Origin: ═╩══╬╩═╩╩═╬╬═ (2:5020/9696.128)

How about to be more classical and honor at least
~/.gossiped.yml (and $XDG_CONFIG_HOME as a bonus?
https://specifications.freedesktop.org/basedir-spec/base
dir-spec -0.6.h tml)

I think dot files in the home dir root (~/) should be not
encouraged anymore. But I also feel
~/.config/gossiped/gossiped.yml would be the right place
for the config file.

That is the default XDG path, IIUC, right?

I think it is, at least this path is used on Debian / Ubuntu. I meant it synonymously for the XDG path.


* Origin: kakistocracy (2:280/464.47)

Hello Zhenja Kaliuta!

12 Jan 20 23:51:18, Zhenja Kaliuta wrote to Alexander N. Skovpen:

F2 works again, but it still did not find the config.yml file.

try this paths:
"/usr/local/etc/ftn/gossiped.yml",
"/etc/ftn/gossiped.yml",
"gossiped.yml",

How about to be more classical and honor at least ~/.gossiped.yml (and $XDG_CONFIG_HOME as a bonus? https://specifications.freedesktop.org/basedir-spec/basedir-spec-0.6.html)

future version:

filepath.Join(os.Getenv("HOME"), "gossiped.yml"), filepath.Join(os.Getenv("HOME"), ".config", "gossiped.yml"), "/usr/local/etc/ftn/gossiped.yml",
"/etc/ftn/gossiped.yml",
"gossiped.yml",

Alexander


--- ════════╦╦═╦╦═╗╔════
* Origin: ═╩══╬╩═╩╩═╬╬═ (2:5020/9696.128)

Hello Alexander N. Skovpen!

13 Jan 20 18:35:56, Alexander N. Skovpen wrote to Richard Menedetter:

BTW when I try to reply to an empty area, then I get a stack dump.

why you reply in empty area? :-) will be fixed

Thanx.
I see you already fixed it!

CU, Ricsi

Test CHRS äöü
--- gossipEd-linux/amd64 2.0.5-50-84e3c8de
* Origin: https://github.com/askovpen/gossiped/ (2:310/31)

Hi, Richard!

On Mon, 13 Jan 2020 20:11:08 +0100 Richard Menedetter writes:

[...]

Test CHRS äöü

å!

--- Gnus/5.13 (Gnus v5.13) Emacs/24.5 (gnu/linux)
* Origin: Somewhere in the North (2:4500/1.59)

Hello Alexander N. Skovpen!

I use the Husky config, and I have a <name> area.
It seems that gossiped does not ignore comments starting with #

fido@vserv:/usr/local/etc/fido$ fgrep "<name>" *
areas:# *Area <name> <file> [Options]
areas:# EchoArea <name> <file> [Options] [linkAKAs] [linkOptions]

CU, Ricsi

--- gossipEd-linux/amd64 2.0.7-b274c49a
* Origin: https://github.com/askovpen/gossiped/ (2:310/31)

Hello Richard Menedetter!

16 Jan 20 20:11:58, Richard Menedetter wrote to Alexander N. Skovpen:

I use the Husky config, and I have a <name> area.
It seems that gossiped does not ignore comments starting with #

fixed in 2.0.9

Alexander


--- ════════╦╦═╦╦═╗╔════
* Origin: ═╩══╬╩═╩╩═╬╬═ (2:5020/9696.128)

Hello Alexander N. Skovpen!

18 Jan 20 11:53:26, Alexander N. Skovpen wrote to Richard Menedetter:

I use the Husky config, and I have a <name> area.
It seems that gossiped does not ignore comments starting with #

fixed in 2.0.9

Alexander

--- ════════╦╦═╦╦═╗╔════
* Origin: ═╩══╬╩═╩╩═╬╬═ (2:5020/9696.128)

тест

'Tommi

--- gossipEd-linux/arm 2.0.9-f4411558
* Origin: Linux 4.4.0-1127-raspi2 #136-Ubuntu SMP armv7l (2:221/1)

Hello Tommi Koivula!

18 Jan 20 09:41:48, Tommi Koivula wrote to Alexander N. Skovpen:

тест

Е ВИДО!

Alexander


--- ════════╦╦═╦╦═╗╔════
* Origin: ═╩══╬╩═╩╩═╬╬═ (2:5020/9696.128)