• Last few callers...

    From Al DeRosa@1:267/157 to All on Sat Oct 1 21:39:30 2022
    Ok I give.. I know I am running an old version. 3.18, I am only running it as a Door Server and it runs fine so I don't see a need to upgrade it to the latest.. Back when I put this door server online, I turned on the last few callers section. I want to turn it off now. I changed the line in modopts.ini and it still is on. I checked my xternal programs area and it is not listed there at all. Is there a way to turn it off in 3.18? If not I guess I will have to upgrade to 3.19b but I would like to just turn it off on this one.. Any info I have checked the wiki and everywhere else I can guess.. Thanks in advance..

    AL

    ... I know a good tagline when I steal one!

    --- Mystic BBS v1.12 A48 2022/07/15 (Linux/64)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (1:267/157)
  • From Digital Man@1:103/705 to Al DeRosa on Sun Oct 2 14:19:58 2022
    Re: Last few callers...
    By: Al DeRosa to All on Sat Oct 01 2022 09:39 pm

    Ok I give.. I know I am running an old version. 3.18, I am only running it as a Door Server and it runs fine so I don't see a need to upgrade it to the latest.. Back when I put this door server online, I turned on the last few callers section. I want to turn it off now. I changed the line in modopts.ini and it still is on. I checked my xternal programs area and it is not listed there at all. Is there a way to turn it off in 3.18? If not I guess I will have to upgrade to 3.19b but I would like to just turn it off on this one.. Any info I have checked the wiki and everywhere else I can guess.. Thanks in advance..

    I think you're refering to the logonlist module. It's disabled by setting show_logon_list=false in the [logon] section of modopts.ini.
    https://wiki.synchro.net/module:logon

    What did you try?
    --
    digital man (rob)

    Sling Blade quote #26:
    Karl: kaiser blade, ax handle with long blade on it shaped kinda like a banana. Norco, CA WX: 80.5øF, 54.0% humidity, 3 mph S wind, 0.00 inches rain/24hrs
    --- SBBSecho 3.15-Linux
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)
  • From Al DeRosa@1:267/157 to Digital Man on Sun Oct 2 19:14:49 2022
    On 02 Oct 2022, Digital Man said the following...

    I think you're refering to the logonlist module. It's disabled by setting show_logon_list=false in the [logon] section of modopts.ini. https://wiki.synchro.net/module:logon

    What did you try?

    I did that, it still shows up.. I am running 3.18 though.. Thanks for the help...

    ... What does it mean to pre-board? Do you get on before you get on?

    --- Mystic BBS v1.12 A48 2022/07/15 (Linux/64)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (1:267/157)
  • From Digital Man@1:103/705 to Al DeRosa on Sun Oct 2 20:28:28 2022
    Re: Re: Last few callers...
    By: Al DeRosa to Digital Man on Sun Oct 02 2022 07:14 pm

    On 02 Oct 2022, Digital Man said the following...

    I think you're refering to the logonlist module. It's disabled by setting show_logon_list=false in the [logon] section of modopts.ini. https://wiki.synchro.net/module:logon

    What did you try?

    I did that, it still shows up.. I am running 3.18 though.. Thanks for the help...

    Are you sure? The logon.js change in question was made Oct-30-2019, almost a year before v3.18b was released.
    --
    digital man (rob)

    This Is Spinal Tap quote #25:
    Viv Savage: Have... a good... time... all the time. That's my philosophy. Norco, CA WX: 68.0øF, 75.0% humidity, 6 mph S wind, 0.00 inches rain/24hrs
    --- SBBSecho 3.15-Linux
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)
  • From Al DeRosa@1:267/157 to Digital Man on Mon Oct 3 17:59:00 2022
    On 02 Oct 2022, Digital Man said the following...


    Are you sure? The logon.js change in question was made Oct-30-2019,
    almost a year before v3.18b was released.
    --

    That's probably the reason the version I am running is 1/1/2019.. I think I am just going to upgrade to the latest version. I don't like staying behind on software and this one I have stayed behind to long... Thanks for the help DM, I do appreciate it...

    AL

    ... DOS=HIGH? I knew it was on something...

    --- Mystic BBS v1.12 A48 2022/07/15 (Linux/64)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (1:267/157)
  • From Al DeRosa@1:267/157 to Digital Man on Mon Oct 3 19:42:42 2022
    On 03 Oct 2022, Digital Man said the following...
    That's probably the reason the version I am running is 1/1/2019..

    v3.17b was released on Jan-1-2019.



    on software and this one I have stayed behind to long... Thanks for the DM, I do appreciate it...

    Sounds like the right move to me.

    Yea, I think so too.. LOL Let me ask you, if I do a full clean install with the latest files. What files can I copy from my old install to keep my user list and doors list, like I said this is a DoorParty type server (which uses the Door Party front end of RLOGIN to the menu) if I can do that I think it might be a lot better off, I did an upgrade to 3.18b last year and now I am seeing it wasn't a complete upgrade but a half assed one.. Jeez.. THanks again for the help..

    Al

    ... 640K ought to be enough for anybody. -Bill Gates, 1981.

    --- Mystic BBS v1.12 A48 2022/07/15 (Linux/64)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (1:267/157)
  • From Digital Man@1:103/705 to Al DeRosa on Mon Oct 3 16:00:10 2022
    Re: Re: Last few callers...
    By: Al DeRosa to Digital Man on Mon Oct 03 2022 05:59 pm

    On 02 Oct 2022, Digital Man said the following...


    Are you sure? The logon.js change in question was made Oct-30-2019, almost a year before v3.18b was released.
    --

    That's probably the reason the version I am running is 1/1/2019..

    v3.17b was released on Jan-1-2019.

    I think I
    am just going to upgrade to the latest version. I don't like staying behind on software and this one I have stayed behind to long... Thanks for the help DM, I do appreciate it...

    Sounds like the right move to me.
    --
    digital man (rob)

    Sling Blade quote #2:
    Karl (re: killing Doyle): I hit him two good whacks in the head with it.
    Norco, CA WX: 83.5øF, 50.0% humidity, 9 mph S wind, 0.00 inches rain/24hrs
    --- SBBSecho 3.15-Linux
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)
  • From Digital Man@1:103/705 to Al DeRosa on Tue Oct 4 11:07:03 2022
    Re: Re: Last few callers...
    By: Al DeRosa to Digital Man on Mon Oct 03 2022 07:42 pm

    On 03 Oct 2022, Digital Man said the following...
    That's probably the reason the version I am running is 1/1/2019..

    v3.17b was released on Jan-1-2019.



    on software and this one I have stayed behind to long... Thanks for the DM, I do appreciate it...

    Sounds like the right move to me.

    Yea, I think so too.. LOL Let me ask you, if I do a full clean install with the latest files. What files can I copy from my old install to keep my user list and doors list,

    Read http://wiki.synchro.net/faq:misc#migration

    like I said this is a DoorParty type server (which uses
    the Door Party front end of RLOGIN to the menu) if I can do that I think it might be a lot better off, I did an upgrade to 3.18b last year and now I am seeing it wasn't a complete upgrade but a half assed one.. Jeez.. THanks again for the help..

    I work hard to make the upgrade path smooth (no "full clean [re]install" should ever be needed). Just make sure you're running 'jsexec update' after each update/upgrade.
    --
    digital man (rob)

    Breaking Bad quote #33:
    This guy [Gale], it's like scarface had sex with Mr. Rogers. - Hank Schrader Norco, CA WX: 63.2øF, 87.0% humidity, 0 mph ENE wind, 0.00 inches rain/24hrs --- SBBSecho 3.15-Linux
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)
  • From Al DeRosa@1:267/157 to Digital Man on Tue Oct 4 18:24:44 2022
    On 04 Oct 2022, Digital Man said the following...


    Read http://wiki.synchro.net/faq:misc#migration

    Thanks DM! Reading it as soon as I finish this message..



    I work hard to make the upgrade path smooth (no "full clean [re]install" should ever be needed). Just make sure you're running 'jsexec update' after each update/upgrade.
    --

    I know, that is why I was shocked when I saw that my modopts.ini was outdated.. I think the way I have been doing them is wrong, Actually, I haven't done one on this server since about a year and half ago. Why change what isn't broken?!? I have been wanting to rebuild this machine anyway. I am going to make sure everything is good and do it in the background.. Thanks again for all the help it means a lot..

    Al

    ... If all the world is a stage, where is the audience sitting?

    --- Mystic BBS v1.12 A48 2022/07/15 (Linux/64)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (1:267/157)
  • From Digital Man@1:103/705 to Al DeRosa on Tue Oct 4 15:30:19 2022
    Re: Re: Last few callers...
    By: Al DeRosa to Digital Man on Tue Oct 04 2022 06:24 pm

    On 04 Oct 2022, Digital Man said the following...


    Read http://wiki.synchro.net/faq:misc#migration

    Thanks DM! Reading it as soon as I finish this message..



    I work hard to make the upgrade path smooth (no "full clean [re]install" should ever be needed). Just make sure you're running 'jsexec update' after each update/upgrade.
    --

    I know, that is why I was shocked when I saw that my modopts.ini was outdated..

    modopts.ini is not automatically updated, nor does it need to be. You just add things to your modopts.ini when you need/want them (e.g. based on instructions from recommendations or documentation).

    I think the way I have been doing them is wrong

    What way is that?

    Actually, I
    haven't done one on this server since about a year and half ago. Why change what isn't broken?!? I have been wanting to rebuild this machine anyway. I am going to make sure everything is good and do it in the background.. Thanks again for all the help it means a lot..

    No problem.
    --
    digital man (rob)

    Sling Blade quote #21:
    Karl: Coffee makes me nervous when I drink it. Mmm.
    Norco, CA WX: 83.4øF, 55.0% humidity, 11 mph SSW wind, 0.00 inches rain/24hrs --- SBBSecho 3.15-Linux
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)
  • From Al DeRosa@1:267/157 to Digital Man on Wed Oct 5 18:33:24 2022
    On 04 Oct 2022, Digital Man said the following...


    modopts.ini is not automatically updated, nor does it need to be. You
    just add things to your modopts.ini when you need/want them (e.g. based
    on instructions from recommendations or documentation).


    I have never updated modopts.ini, but it was missing the section of last_user listing.. It only had the question on whether or not to show it.


    I think the way I have been doing them is wrong

    What way is that?

    I have been updating exec via the separate update files, sbb_dev.zip, run.zip, ctrl etc. then running jsexec.js update.. Last night I did a full re-install and read the Wiki of what directories to copy over, installed my door Server Rlogin package in the mods directory and everything worked like a charm.. Just gotta finish updating the VM it resides in and it will be ready to go online in place of my current one..

    THank you again for all the help.. The more I screw around with the internal workings of it, I am learning more about it..

    Al

    ... How do I set my laser printer to stun?

    --- Mystic BBS v1.12 A48 2022/07/15 (Linux/64)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (1:267/157)
  • From Digital Man@1:103/705 to Al DeRosa on Wed Oct 5 16:50:22 2022
    Re: Re: Last few callers...
    By: Al DeRosa to Digital Man on Wed Oct 05 2022 06:33 pm

    On 04 Oct 2022, Digital Man said the following...


    modopts.ini is not automatically updated, nor does it need to be. You just add things to your modopts.ini when you need/want them (e.g. based on instructions from recommendations or documentation).


    I have never updated modopts.ini, but it was missing the section of last_user listing.. It only had the question on whether or not to show it.


    I think the way I have been doing them is wrong

    What way is that?

    I have been updating exec via the separate update files, sbb_dev.zip, run.zip, ctrl etc. then running jsexec.js update..

    That sounds like the correct way. Approximately what is described at http://wiki.synchro.net/install:dev

    Last night I did a full
    re-install and read the Wiki of what directories to copy over, installed my door Server Rlogin package in the mods directory and everything worked like a charm.. Just gotta finish updating the VM it resides in and it will be ready to go online in place of my current one..

    THank you again for all the help.. The more I screw around with the internal workings of it, I am learning more about it..

    Cool.
    --
    digital man (rob)

    Breaking Bad quote #3:
    Please tell me: how much is enough? How big does this pile have to be? - Skyler Norco, CA WX: 82.6øF, 53.0% humidity, 7 mph S wind, 0.00 inches rain/24hrs
    --- SBBSecho 3.15-Linux
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)
  • From Al DeRosa@1:267/157 to Digital Man on Thu Oct 6 18:34:31 2022
    On 05 Oct 2022, Digital Man said the following...

    Last night I did a full
    re-install and read the Wiki of what directories to copy over, installe door Server Rlogin package in the mods directory and everything worked a charm.. Just gotta finish updating the VM it resides in and it will b ready to go online in place of my current one..

    THank you again for all the help.. The more I screw around with the int workings of it, I am learning more about it..

    Cool.
    --

    Thanks again Rob, everything is in fact better then before. Everything is working as described and now that I have a new set up, I can rebuild my directories and instead of having 11 directories of doors, break it down into a more manageable 5 or 6.. With just about 200 doors online it gets crazy.. LOL

    Al

    ... Press any key to continue or any other key to quit...

    --- Mystic BBS v1.12 A48 2022/07/15 (Linux/64)
    * Origin: The Wrong Number Family Of BBS' - Wrong Number ][ (1:267/157)