• Fido Package Deluxe

    From Martin Foster@2:250/1.1 to Torsten Bamberg on Sun Feb 11 11:01:00 2018
    Hello Torsten!

    On 11.02.18 at 00:53, Torsten Bamberg wrote to Tommi Koivula:

    [..]
    Also I have to port tiroute to english.

    I can help with that if necessary ;-))

    Regards,
    Martin

    --- OpenXP 5.0.33
    * Origin: Bitz-Box - Bradford - UK (2:250/1.1)
  • From Martin Foster@2:250/1.1 to Torsten Bamberg on Sun Feb 11 11:19:00 2018
    Hello Torsten!

    On the 08.02.18 at 11:09, Torsten Bamberg wrote to Martin Foster:

    Probably it might be easyier to write a complete new fpd with
    lazarus, intended by the original fpd.
    Yes and if I had the necessary programming skills, I'd do it. However,
    I know someone who does have the necessary programming skills, so I've
    sent him a copy of the source to play about with ;-)
    Ah, okay. :-)

    I've had a reply back from him and it's not good news :-(

    Basically, he's said more or less the same as you and, that in his
    opinion, it's not worth the hassle of trying to port it to Lazarus/fpc.

    Ah well, I suppose that's the end of that :-(

    Regards,
    Martin

    --- OpenXP 5.0.33
    * Origin: Bitz-Box - Bradford - UK (2:250/1.1)
  • From Tommi Koivula@2:221/360 to Torsten Bamberg on Sun Feb 11 13:45:07 2018
    Sunday February 11 2018 00:53, Torsten Bamberg wrote to Tommi Koivula:

    10.02.2018 10:16, Tommi Koivula schrieb an Torsten Bamberg:

    ---- tirou051.zip 62121 16-11-14 TiRoute ist ein
    There seems to be a problem with ":port" ...
    ,IBN:24555,INA:eljaco.se,

    Yes and No. Yes, tiroute doesn't detect a differnt ip-port.
    And no, because an other port than 24554 wasn't common in 2005.
    On 2004 I started to programmed tiroute. During that time IBN was not
    used n the nodelist, only PVT nodes where used for binkd connections.

    So, time for an update, then. :-)

    Also I have to port tiroute to english.

    Gut!

    'Tommi

    --- GoldED+/EMX 1.1.5-b20170303
    * Origin: * Rampton Birds Box * Lake Ylo * Finland * (2:221/360)
  • From Martin Foster@2:250/1.1 to All on Mon Feb 5 14:15:10 2018
    Greetings All!

    As it's such a very long time since I last looked at Fido Package Deluxe, I thought I'd give it a spin on my Win10(x64) box. I was expecting a few problems
    but no, it works extremely well "out of the box". One problem I've noticed so far is that the included version of "IPRoute" is for DOS and, naturally, it won't run. Anyone know where I can get a Win32 version from?

    As the author's website seems to have disappeared, I've made Fido Package Deluxe(along with the source) available from here: http://fidonet.openxp.uk/fpd

    Regards,
    Martin

    --- WinPoint Beta 5 (359.1)
    * Origin: Bitz-Box - Bradford - UK (2:250/1.1)
  • From Torsten Bamberg@2:240/5832 to Martin Foster on Mon Feb 5 21:55:07 2018
    Hallo Martin!

    05.02.2018 14:15, Martin Foster schrieb an All:

    As it's such a very long time since I last looked at Fido Package
    Deluxe, I thought I'd give it a spin on my Win10(x64) box. I was
    expecting a few problems but no, it works extremely well "out of the
    box". One problem I've noticed so far is that the included version of "IPRoute" is for DOS and, naturally, it won't run. Anyone know where I
    can get a Win32 version from?
    IPRoute was written by Volker Imre. From IPRoute there are no sourcecodes available. Also Volker has left fidonet about 10 years ago.
    There is an alternative, called tiroute. If something won't work with tiroute and fido deluxe, send me a detailed bugreport, and I will fix/change it.


    SFS/2 3.1 hat auf der Suche nach "TIROUTE" folgendes gefunden: ------------------------------------------------------------------------------- tirou051.zip 62121 16-11-14 TiRoute ist ein Programm welches aus der
    aktuellsten Nodeliste
    in einem Verzeichnis die Systeme heraussucht,
    welche mit frei
    definierbaren Such-Flags versehen sind.
    Bugfixed: Namen wurden nicht korrekt zusortiert
    Ausfuerbar unter Os2/eCS und W32
    Version 0.5.1, Nov.2014 (c) Torsten Bamberg,
    2:240/5832 ------------------------------------------------------------------------------- Anzahl gefundener Files: 1

    DatenBahn BBS
    2:240/5834, Binkp, datenbahn.dd-dns.de

    As the author's website seems to have disappeared, I've made Fido
    Package Deluxe(along with the source) available from here: http://fidonet.openxp.uk/fpd
    Have yo compiled a win10 version with the sources?

    Regards,
    Martin
    Bye/2 Torsten

    ... MAILBOX: 21:11h - up 9d 2h 49m load: 30 proc, 115 threads (tbupv1.1)
    --- GoldED+ 1.1.5
    * Origin: DatenBahn BBS Hamburg (2:240/5832)
  • From Martin Foster@2:250/1.1 to Torsten Bamberg on Tue Feb 6 12:00:00 2018
    Hello Torsten!

    On 05.02.18 at 21:55:07, Torsten Bamberg wrote to Martin Foster:
    05.02.2018 14:15, Martin Foster schrieb an All:

    As it's such a very long time since I last looked at Fido Package
    Deluxe, I thought I'd give it a spin on my Win10(x64) box. I was
    expecting a few problems but no, it works extremely well "out of the
    box". One problem I've noticed so far is that the included version of
    "IPRoute" is for DOS and, naturally, it won't run. Anyone know where I
    can get a Win32 version from?
    IPRoute was written by Volker Imre. From IPRoute there are no sourcecodes available. Also Volker has left fidonet about 10 years ago. There is an alternative, called tiroute. If something won't work with tiroute and
    fido deluxe, send me a detailed bugreport, and I will fix/change it.

    OK, thanks for that.

    However, the included version of BinkD is *very* old(0.9.7), so I've replaced it in my own setup with a newer version(1.1a-49). As I'm a bit "rusty" with BinkD, I'm not sure if I actually need any of these utilities at all.

    [..]
    As the author's website seems to have disappeared, I've made Fido
    Package Deluxe(along with the source) available from here:
    http://fidonet.openxp.uk/fpd
    Have yo compiled a win10 version with the sources?

    Having had a look at the .dof files, it looks as though the original was compiled with Delphi. As I'm not a programmer, I wouldn't know where to start with setting up a more modern build environment(Lazarus perhaps?). So, the answer to your question is "no".

    Regards,
    Martin

    --- WinPoint Beta 5 (359.1)
    * Origin: Bitz-Box - Bradford - UK (2:250/1.1)
  • From Torsten Bamberg@2:240/5832 to Martin Foster on Tue Feb 6 19:29:39 2018
    Hallo Martin!

    06.02.2018 12:00, Martin Foster schrieb an Torsten Bamberg:

    IPRoute was written by Volker Imre. From IPRoute there are no
    sourcecodes available. Also Volker has left fidonet about 10
    years ago. There is an alternative, called tiroute. If something
    won't work with tiroute and fido deluxe, send me a detailed
    bugreport, and I will fix/change it.
    OK, thanks for that.
    However, the included version of BinkD is *very* old(0.9.7), so I've replaced it in my own setup with a newer version(1.1a-49). As I'm a
    bit "rusty" with BinkD, I'm not sure if I actually need any of these utilities at all.
    Well, IPRoute also like tiroute gets the IP-Nodes from the nodelist and writes a binkd-compatible list.
    This is usefull for requests to other node-sysops an for crashing netmail to other systems.

    [..]
    As the author's website seems to have disappeared, I've made
    Fido Package Deluxe(along with the source) available from here:
    http://fidonet.openxp.uk/fpd
    Have yo compiled a win10 version with the sources?
    Having had a look at the .dof files, it looks as though the original
    was compiled with Delphi. As I'm not a programmer, I wouldn't know
    where to start with setting up a more modern build environment(Lazarus perhaps?). So, the answer to your question is "no".
    Ahm, okay. Well, fidopoint deluxe uses some closed source pascal units. Those are not compatible with freepascal nor then lazarus. I've tried to compile the sources, but, as expected, those closed source units aren't available any more. A few years ago I talked with michael about theese problems, and he was not able to correct or fix the code for freepascal. Maybe he didn't wanted, I honesly don't know.

    If somebody has enought time, feel free to port fpd to freepascal. ;-)
    Probably it might be easyier to write a complete new fpd with lazarus, intended
    by the original fpd.

    My personal skills are more with c than pascal. I'm able to patch and correct some lines, but I haven't enough time to do some more on the code.
    Obviously, the old fpd runs on win10,win7-32/64 and all other windows platforms. Currently this should be enough.

    Regards,
    Martin

    Bye/2 Torsten

    ... MAILBOX: 18:37h - up 10d 0h 15m load: 28 proc, 113 threads (tbupv1.1)
    --- GoldED+ 1.1.5
    * Origin: DatenBahn BBS Hamburg (2:240/5832)
  • From Martin Foster@2:250/1.1 to Torsten Bamberg on Thu Feb 8 09:08:48 2018
    Hello Torsten!

    On 06.02.18 at 19:29:39, Torsten Bamberg wrote to Martin Foster:
    06.02.2018 12:00, Martin Foster schrieb an Torsten Bamberg:

    IPRoute was written by Volker Imre. From IPRoute there are no
    sourcecodes available. Also Volker has left fidonet about 10 years ago.
    There is an alternative, called tiroute. If something won't work with
    tiroute and fido deluxe, send me a detailed bugreport, and I will
    fix/change it.
    OK, thanks for that. However, the included version of BinkD is *very*
    old(0.9.7), so I've replaced it in my own setup with a newer
    version(1.1a-49). As I'm a bit "rusty" with BinkD, I'm not sure if I
    actually need any of these utilities at all.
    Well, IPRoute also like tiroute gets the IP-Nodes from the nodelist and writes a binkd-compatible list. This is usefull for requests to other node-sysops an for crashing netmail to other systems.

    I've been digging around in the BINKD echo and according to what somebody said in there, binkD doesn't actually need a nodelist. It can be configured to use "binkp.net" to do DNS lookups. I've tried it and it does work, although there's
    a few seconds delay whilst performing the DNS lookup.

    [..]
    If somebody has enought time, feel free to port fpd to freepascal. ;-)

    Yes please :-)))

    Probably it might be easyier to write a complete new fpd with lazarus, intended by the original fpd.

    Yes and if I had the necessary programming skills, I'd do it. However, I know someone who does have the necessary programming skills, so I've sent him a copy
    of the source to play about with ;-)

    Regards,
    Martin

    --- WinPoint Beta 5 (359.1)
    * Origin: Bitz-Box - Bradford - UK (2:250/1.1)
  • From Torsten Bamberg@2:240/5832 to Martin Foster on Thu Feb 8 11:09:04 2018
    Hallo Martin!

    08.02.2018 09:08, Martin Foster schrieb an Torsten Bamberg:

    Well, IPRoute also like tiroute gets the IP-Nodes from the
    nodelist and writes a binkd-compatible list. This is usefull for
    requests to other node-sysops an for crashing netmail to other
    systems.
    I've been digging around in the BINKD echo and according to what
    somebody said in there, binkD doesn't actually need a nodelist. It can
    be configured to use "binkp.net" to do DNS lookups. I've tried it and
    it does work, although there's a few seconds delay whilst performing
    the DNS lookup.
    Well, binkp.net has some issues, and isn't available 24/7/365.

    Probably it might be easyier to write a complete new fpd with
    lazarus, intended by the original fpd.
    Yes and if I had the necessary programming skills, I'd do it. However,
    I know someone who does have the necessary programming skills, so I've sent him a copy of the source to play about with ;-)
    Ah, okay. :-)
    I can do some beta/alapha testings, also compile lazarus sources to OS/2-Linux if needed.

    Regards,
    Martin
    Bye/2 Torsten

    ... MAILBOX: 10:56h - up 11d 16h 32m load: 28 proc, 113 threads (tbupv1.1)
    --- GoldED+ 1.1.5
    * Origin: DatenBahn BBS Hamburg (2:240/5832)
  • From Martin Foster@2:250/1.1 to Torsten Bamberg on Fri Feb 9 11:48:00 2018
    Hello Torsten!

    ** 08.02.18 at 11:09, Torsten Bamberg wrote to Martin Foster:

    08.02.2018 09:08, Martin Foster schrieb an Torsten Bamberg:

    Well, IPRoute also like tiroute gets the IP-Nodes from the
    nodelist and writes a binkd-compatible list. This is usefull for
    requests to other node-sysops an for crashing netmail to other
    systems.
    I've been digging around in the BINKD echo and according to what
    somebody said in there, binkD doesn't actually need a nodelist. It can
    be configured to use "binkp.net" to do DNS lookups. I've tried it and
    it does work, although there's a few seconds delay whilst performing
    the DNS lookup.
    Well, binkp.net has some issues, and isn't available 24/7/365.

    OK, thanks for the warning.

    Probably it might be easyier to write a complete new fpd with
    lazarus, intended by the original fpd.
    Yes and if I had the necessary programming skills, I'd do it. However,
    I know someone who does have the necessary programming skills, so I've
    sent him a copy of the source to play about with ;-)
    Ah, okay. :-)

    Don't hold your breath ;)

    I can do some beta/alapha testings, also compile lazarus sources to OS/2-Linux if needed.

    Thanks very much for your offer and I'll bear it mind :-)

    Regards,
    Martin

    --- OpenXP 5.0.33
    * Origin: Bitz-Box - Bradford - UK (2:250/1.1)
  • From Torsten Bamberg@2:240/5832 to Tommi Koivula on Sun Feb 11 00:53:50 2018
    Hallo Tommi!

    10.02.2018 10:16, Tommi Koivula schrieb an Torsten Bamberg:

    ---- tirou051.zip 62121 16-11-14 TiRoute ist ein
    There seems to be a problem with ":port" ...
    ,IBN:24555,INA:eljaco.se,
    Yes and No. Yes, tiroute doesn't detect a differnt ip-port.
    And no, because an other port than 24554 wasn't common in 2005.
    On 2004 I started to programmed tiroute. During that time IBN was not used n the nodelist, only PVT nodes where used for binkd connections.

    === Cut ===
    node 2:203/0@fidonet 24555 - # bjorn_felten
    node 2:203/0@fidonet eljaco.se - # bjorn_felten
    node 2:203/2@fidonet eljaco.se - # bjorn_felten
    === Cut ===
    Also if there are multiple IBN's, binkd will use only the last one. :( ,IBN:fido.vlist.eu,IBN:fido4to6.vlist.eu,
    Nearly the same, yes, tiroute doesn't detect multiples IBN flags.

    I will fix both nodelist-changes this in a few days.

    Otherwise, nice program. Like nl2binkd by Markus Reschke. :)
    Well, nl2binkd is a perl script. As a perl script, nl2binkd needs a perl interpretation environment. A perl environment is usually available with linux and bsd, but is not widely used on Os/2 (Ecomstation/Arcanoae) and Windows.

    tiroute is a native OS/2 32 Bit and Win 32 Bit Programm build with Watcom. An emx version is also in progress. Because of a native application, tiroute has no memory leaks and needs no further environment.
    Also tiroute uses _shurely_ the latest nodelist, and checks the nodelist of errors, whom are usually build into the z2 nodelist by zc2.

    tiroute is also available for plain DOS. Some of the collegues still using DOS.
    :-) If you ever tried to get perl working on plain DOS, you will ever prefer a nativ DOS-application.

    Also I have to port tiroute to english.

    'Tommi
    Bye/2 Torsten

    ... MAILBOX: 0:32h - up 14d 6h 07m load: 32 proc, 117 threads (tbupv1.1)
    --- GoldED+ 1.1.5
    * Origin: DatenBahn BBS Hamburg (2:240/5832)
  • From Torsten Bamberg@2:240/5832 to Martin Foster on Sun Feb 11 01:29:22 2018
    Hallo Martin!

    10.02.2018 14:36, Martin Foster schrieb an Torsten Bamberg:

    At the second attempt, I managed to f'req it from your system, thanks
    :-)
    Some things needing more than one try.... ;-)

    I've incorporated it into my FPD test system and it works a treat ;-)
    Great.

    Anyway, I fix those things, Tommi sent to me.

    Regards,
    Martin

    * Origin: Bitz-Box - Bradford - UK (2:250/1.1)
    Ouffz.. Bradford, cewl, I stayed in Stratford uAve while on college.

    Bye/2 Torsten

    ... MAILBOX: 0:32h - up 14d 6h 07m load: 32 proc, 117 threads (tbupv1.1)
    --- GoldED+ 1.1.5
    * Origin: DatenBahn BBS Hamburg (2:240/5832)
  • From Tommi Koivula@2:221/1.1 to Torsten Bamberg on Sat Feb 10 10:16:08 2018
    Hi Torsten.

    05 Feb 18 21:55:06, you wrote to Martin Foster:

    IPRoute was written by Volker Imre. From IPRoute there are no sourcecodes available. Also Volker has left fidonet about 10 years ago.
    There is an alternative, called tiroute. If something won't work with tiroute and fido deluxe, send me a detailed bugreport, and I will fix/change it.


    SFS/2 3.1 hat auf der Suche nach "TIROUTE" folgendes gefunden: ---------------------------------------------------------------------------
    ---- tirou051.zip 62121 16-11-14 TiRoute ist ein Programm welches

    There seems to be a problem with ":port" ...

    ,IBN:24555,INA:eljaco.se,

    === Cut ===
    node 2:203/0@fidonet 24555 - # bjorn_felten
    node 2:203/0@fidonet eljaco.se - # bjorn_felten
    node 2:203/2@fidonet eljaco.se - # bjorn_felten
    === Cut ===

    Also if there are multiple IBN's, binkd will use only the last one. :(

    ,IBN:fido.vlist.eu,IBN:fido4to6.vlist.eu,

    === Cut ===
    node 2:280/5555@fidonet fido.vlist.eu - # michiel_van_der_vlist
    node 2:280/5555@fidonet fido4to6.vlist.eu - # michiel_van_der_vlist
    === Cut ===

    Otherwise, nice program. Like nl2binkd by Markus Reschke. :)

    'Tommi

    ... \\HAL has been up for: 28 day(s), 13 hour(s), 24 minute(s), 35 second(s) ---
    * Origin: IPv6 Point at [2001:470:1f15:cb0:2:221:1:1] (2:221/1.1)
  • From Martin Foster@2:250/1.1 to Torsten Bamberg on Sat Feb 10 14:36:02 2018
    Hello Torsten!

    On 05.02.18 at 21:55:07, Torsten Bamberg wrote to Martin Foster:
    05.02.2018 14:15, Martin Foster schrieb an All:

    As it's such a very long time since I last looked at Fido Package
    Deluxe, I thought I'd give it a spin on my Win10(x64) box. I was
    expecting a few problems but no, it works extremely well "out of the
    box". One problem I've noticed so far is that the included version of
    "IPRoute" is for DOS and, naturally, it won't run. Anyone know where I
    can get a Win32 version from?
    IPRoute was written by Volker Imre. From IPRoute there are no sourcecodes available. Also Volker has left fidonet about 10 years ago. There is an alternative, called tiroute. If something won't work with tiroute and
    fido deluxe, send me a detailed bugreport, and I will fix/change it.

    At the second attempt, I managed to f'req it from your system, thanks :-)

    I've incorporated it into my FPD test system and it works a treat ;-)

    Regards,
    Martin

    --- WinPoint Beta 5 (359.1)
    * Origin: Bitz-Box - Bradford - UK (2:250/1.1)
  • From Dale Barnes@1:220/60 to Torsten Bamberg on Wed Mar 21 19:09:38 2018
    I tried to take a peek at the code but was unable to download. Anyone have a copy I can grab?

    Thanks

    Hallo Martin!

    06.02.2018 12:00, Martin Foster schrieb an Torsten Bamberg:

    IPRoute was written by Volker Imre. From IPRoute there are no
    sourcecodes available. Also Volker has left fidonet about 10
    years ago. There is an alternative, called tiroute. If something
    won't work with tiroute and fido deluxe, send me a detailed
    bugreport, and I will fix/change it.
    OK, thanks for that.
    However, the included version of BinkD is *very* old(0.9.7), so I've
    replaced it in my own setup with a newer version(1.1a-49). As I'm a
    bit "rusty" with BinkD, I'm not sure if I actually need any of these
    utilities at all.
    Well, IPRoute also like tiroute gets the IP-Nodes from the
    nodelist and writes a binkd-compatible list.
    This is usefull for requests to other node-sysops an for
    crashing netmail to other systems.

    [..]
    As the author's website seems to have disappeared, I've made
    Fido Package Deluxe(along with the source) available from here:
    http://fidonet.openxp.uk/fpd
    Have yo compiled a win10 version with the sources?
    Having had a look at the .dof files, it looks as though the original
    was compiled with Delphi. As I'm not a programmer, I wouldn't know
    where to start with setting up a more modern build environment(Lazarus
    perhaps?). So, the answer to your question is "no".
    Ahm, okay. Well, fidopoint deluxe uses some closed source
    pascal units. Those are not compatible with freepascal nor
    then lazarus. I've tried to compile the sources, but, as
    expected, those closed source units aren't available any
    more.
    A few years ago I talked with michael about theese
    problems, and he was not able to correct or fix the code
    for freepascal. Maybe he didn't wanted, I honesly don't
    know.

    If somebody has enought time, feel free to port fpd to
    freepascal. ;-)
    Probably it might be easyier to write a complete new fpd
    with lazarus, intended by the original fpd.

    My personal skills are more with c than pascal. I'm able to
    patch and correct some lines, but I haven't enough time to
    do some more on the code.
    Obviously, the old fpd runs on win10,win7-32/64 and all
    other windows platforms. Currently this should be enough.

    Regards,
    Martin

    Bye/2 Torsten

    ... MAILBOX: 18:37h - up 10d 0h 15m load: 28 proc, 113
    threads (tbupv1.1)
    --- GoldED+ 1.1.5
    * Origin: DatenBahn BBS Hamburg (2:240/5832)


    --- InterEcho 1.20
    * Origin: Home Of InterMail/InterEcho (1:220/60)
  • From Martin Foster@2:250/1.1 to Dale Barnes on Thu Mar 22 11:34:00 2018
    Hello Dale!

    On 21.03.18 at 19:09, Dale Barnes wrote to Torsten Bamberg:

    I tried to take a peek at the code but was unable to download.

    Yeah, I've been moving stuff around(again!), sorry about that.

    It's here .....

    http://openxp.uk/pub/fpd

    Regards,
    Martin

    --- OpenXP 5.0.34
    * Origin: Bitz-Box - Bradford - UK (2:250/1.1)
  • From Dale Barnes@1:220/60 to Martin Foster on Thu Mar 22 08:09:30 2018
    Hello Dale!

    On 21.03.18 at 19:09, Dale Barnes wrote to Torsten Bamberg:

    I tried to take a peek at the code but was unable to download.

    Yeah, I've been moving stuff around(again!), sorry about
    that.


    So you like to keep us guessing I see. Ok, have the files and now looking for the package out there that is the matching released version (or close to it) to
    give me an idea of what and how it runs.

    Already see a couple of key units missing but will research what missing and see what can be done. Take it this package was a pretty good point system?


    --- InterEcho 1.20
    * Origin: Home Of InterMail/InterEcho (1:220/60)
  • From Martin Foster@2:250/1.1 to Dale Barnes on Fri Mar 23 09:59:00 2018
    Hello Dale!

    On 22.03.18 at 08:09, Dale Barnes wrote to Martin Foster:

    On 21.03.18 at 19:09, Dale Barnes wrote to Torsten Bamberg:

    I tried to take a peek at the code but was unable to download.

    Yeah, I've been moving stuff around(again!), sorry about
    that.


    So you like to keep us guessing I see.

    Yeah, that's me all over =:)

    Ok, have the files and now looking for the package out there that
    is the matching released version (or close to it) to give me an
    idea of what and how it runs.

    http://openxp.uk/pub/fpd/fidopd29.zip

    Already see a couple of key units missing but will research what
    missing and see what can be done.

    Please keep us posted :)

    Take it this package was a pretty good point system?

    Yep, sure was(is) but it's a bit dated now.

    Includes binkP, hpt, goldED, FastLst and other stuff which are all automatically configured from the data entered by the user in the
    setup utility.

    Regards,
    Martin

    --- OpenXP 5.0.34
    * Origin: Bitz-Box - Bradford - UK (2:250/1.1)
  • From Dale Barnes@1:220/60 to Martin Foster on Fri Mar 23 08:20:45 2018
    Already see a couple of key units missing but will research what
    missing and see what can be done.

    Please keep us posted :)


    Ok, reviewed the code some last night and here are my thoughts:

    It appears it uses the old NetMaster Delphi Components. Can be swamped out for
    something more public like Indy. I have the Netmaster code but it old.

    Also uses ExcMagic which can be removed since it appears the package is not sold or has not been updated in many years and do not see the source. It apperas to be missing some of the units so have not tried to determine what impact it would have. It does have a couple of other components that would have to be rebuit if you still wanted some of the same functions that exist today.

    I do see how it calls in the code bink and the golded (both sources are those are also available) but after reviewing it, it would make more sense to write a
    new one from scratch to take advantage of FPC.


    --- InterEcho 1.20
    * Origin: Home Of InterMail/InterEcho (1:220/60)
  • From Torsten Bamberg@2:240/5832 to Dale Barnes on Fri Mar 23 18:25:37 2018
    Hallo Dale!

    23.03.2018 08:20, Dale Barnes schrieb an Martin Foster:

    I do see how it calls in the code bink and the golded (both sources
    are those are also available) but after reviewing it, it would make
    more sense to write a new one from scratch to take advantage of FPC.
    As I've already written to Martin, it make more sense to do a full rewrite with
    fpc than using old components.

    Just open a github repo, and we'll start a rewrite.
    My skills with pascal are not very high, but to support an compile a new fido packet deluxe for OS/2 and Linux/Unix it might be ok.

    Bye/2 Torsten

    ... MAILBOX: 17:26h - up 6d 22h 24m load: 28 proc, 112 threads (tbupv1.1)
    --- GoldED+ 1.1.5
    * Origin: DatenBahn BBS Hamburg (2:240/5832)
  • From Dale Barnes@1:220/60 to Torsten Bamberg on Fri Mar 23 14:28:29 2018
    Hallo Dale!

    23.03.2018 08:20, Dale Barnes schrieb an Martin Foster:

    I do see how it calls in the code bink and the golded (both sources
    are those are also available) but after reviewing it, it would make
    more sense to write a new one from scratch to take advantage of
    FPC.As I've already written to Martin, it make more sense
    to do a full rewrite with fpc than using old components.

    Just open a github repo, and we'll start a rewrite.
    My skills with pascal are not very high, but to support an
    compile a new fido packet deluxe for OS/2 and Linux/Unix it
    might be ok.


    Are there currently no point software for OS/2 Linux Currently?


    --- InterEcho 1.20
    * Origin: Home Of InterMail/InterEcho (1:220/60)
  • From Torsten Bamberg@2:240/5832 to Dale Barnes on Fri Mar 23 23:23:38 2018
    Hallo Dale!

    23.03.2018 14:28, Dale Barnes schrieb an Torsten Bamberg:

    Just open a github repo, and we'll start a rewrite.
    My skills with pascal are not very high, but to support an
    compile a new fido packet deluxe for OS/2 and Linux/Unix it
    might be ok.

    Are there currently no point software for OS/2 Linux Currently?
    Not some proper supported ones. The husky-suite needs to be updated, but husky doesn't support CDP, an automatic point-adding and point creating procedure.

    Meanwhile I've created a github repo.

    https://github.com/torbam1/fido_packet_deluxe_2018

    I also added my sources to a new branch. My sources are the original sources from michael haase.

    If someone else wants to have r/w to the repo, netmail me your valid email and a password.

    Bye/2 Torsten

    ... MAILBOX: 20:21h - up 7d 1h 18m load: 28 proc, 112 threads (tbupv1.1)
    --- GoldED+ 1.1.5
    * Origin: DatenBahn BBS Hamburg (2:240/5832)
  • From Dale Barnes@1:220/60 to Torsten Bamberg on Fri Mar 23 21:08:05 2018
    Meanwhile I've created a github repo.

    https://github.com/torbam1/fido_packet_deluxe_2018


    Odd as I just went to the site and got a 404 error.

    Will try again later


    --- InterEcho 1.20
    * Origin: Home Of InterMail/InterEcho (1:220/60)
  • From Martin Foster@2:250/1.1 to Dale Barnes on Sat Mar 24 09:49:00 2018
    Hello Dale!

    On 23.03.18 at 21:08, Dale Barnes wrote to Torsten Bamberg:

    Meanwhile I've created a github repo.

    https://github.com/torbam1/fido_packet_deluxe_2018
    ^
    |

    Odd as I just went to the site and got a 404 error.

    Will try again later

    Try this:
    https://github.com/torbam1/fido_paket_deluxe_2018

    Regards,
    Martin

    --- OpenXP 5.0.34
    * Origin: Bitz-Box - Bradford - UK (2:250/1.1)
  • From Martin Foster@2:250/1.1 to Torsten Bamberg on Sat Mar 24 09:59:00 2018
    Hello Torsten!

    On 23.03.18 at 23:23, Torsten Bamberg wrote to Dale Barnes:

    [..]
    Meanwhile I've created a github repo.

    https://github.com/torbam1/fido_packet_deluxe_2018

    I also added my sources to a new branch. My sources are the
    original sources from michael haase.

    Excellent and thank you very much indeed for that :-)

    If someone else wants to have r/w to the repo, netmail me your
    valid email and a password.

    I'd love to but I'm not familiar with how to use 'git'. I've used
    'svn' for the last 18 years and 'cvs' before that. Is there an
    "idiot's guide" to 'git' anywhere?

    Regards,
    Martin

    --- OpenXP 5.0.34
    * Origin: Bitz-Box - Bradford - UK (2:250/1.1)
  • From Dale Barnes@1:220/60 to Martin Foster on Sat Mar 24 08:34:51 2018
    Odd as I just went to the site and got a 404 error.

    Will try again later

    Try this:
    https://github.com/torbam1/fido_paket_deluxe_2018


    Was able to get there but there was only a read me file....which I read. :)


    --- InterEcho 1.20
    * Origin: Home Of InterMail/InterEcho (1:220/60)
  • From Torsten Bamberg@2:240/5832 to Dale Barnes on Sat Mar 24 16:23:21 2018
    Hallo Dale!

    24.03.2018 08:34, Dale Barnes schrieb an Martin Foster:

    Was able to get there but there was only a read me file....which I
    read. :)
    ˇhm, yes. I'm not used with github. I've uploaded the files to another branch, but the file gone somewhere...

    I'll fix it tomorrow. Now I'm going to a metal music concert.
    :-)

    Bye/2 Torsten

    ... MAILBOX: 16:22h - up 7d 21h 18m load: 29 proc, 113 threads (tbupv1.1)
    --- GoldED+ 1.1.5
    * Origin: DatenBahn BBS Hamburg (2:240/5832)
  • From Torsten Bamberg@2:240/5832 to Dale Barnes on Sun Mar 25 23:04:28 2018
    Hallo Dale!

    24.03.2018 08:34, Dale Barnes schrieb an Martin Foster:

    https://github.com/torbam1/fido_paket_deluxe_2018
    Was able to get there but there was only a read me file....which I
    read. :)
    I've got to merge a 'pull request' into the branch.

    By now, the old files are on github available.

    https://github.com/torbam1/fido_paket_deluxe_2018

    Bye/2 Torsten

    ... MAILBOX: 23:04h - up 9d 2h 59m load: 29 proc, 113 threads (tbupv1.1)
    --- GoldED+ 1.1.5
    * Origin: DatenBahn BBS Hamburg (2:240/5832)
  • From Flavio Bessa@4:801/189.1 to Torsten Bamberg on Thu Jul 12 15:53:42 2018
    Hello Torsten.

    25 Mar 18 23:04, you wrote to Dale Barnes:

    By now, the old files are on github available.

    https://github.com/torbam1/fido_paket_deluxe_2018

    I understand that the files are under the Source directory.

    How do I compile them?

    Flavio

    ... "Vamos rachar o neg¢cio do frango?" - Fuchs, 1§ Encontro
    --- MacFidoIP 1.0 (OSX)
    * Origin: Hyperion's Orbit - Resisting since 1995! (4:801/189.1)
  • From Torsten Bamberg@2:240/5832 to Flavio Bessa on Fri Jul 13 17:11:21 2018
    Hallo Flavio!

    12.07.2018 15:53, Flavio Bessa schrieb an Torsten Bamberg:

    https://github.com/torbam1/fido_paket_deluxe_2018

    I understand that the files are under the Source directory.
    How do I compile them?
    Well, you won't be able to compile the sourcefiles, because of some missing units. Michael, the developer of fpd has used some commercial turbo-pascal units. Theese commercial units are not included in the sourcetree.

    At the beginning of this year, we decided to upload the available packages of fpd to github. I've got the latest package of fpd from the developer, so I uploaded it.

    Anyway, it might be easyer to do a complete rewrite of fpd, than trying to buy thoose missing units.

    Flavio
    Bye/2 Torsten

    ... MAILBOX01: up 7d 8h 35m load: 39 proc, 153 threads (tbupv1.0)
    --- GoldED+ 1.1.5-18
    * Origin: DatenBahn BBS Hamburg (2:240/5832)