Hello All!

----- tommi begins -----
02 Mar 18 23:59:36 binkp[4928]: answering incoming call
02 Mar 18 23:59:36 binkp[4928]: remote is 0.0.0.0
02 Mar 18 23:59:36 binkp[4928]: starting inbound Binkp session
02 Mar 18 23:59:36 binkp[4928]: address: 2:221/0@fidonet
02 Mar 18 23:59:36 binkp[4928]: aka: 2:221/1@fidonet 2:221/360@fidonet
02 Mar 18 23:59:36 binkp[4928]: system: RBB/2
02 Mar 18 23:59:36 binkp[4928]: from: Lake Ylo, Finland
02 Mar 18 23:59:36 binkp[4928]: sysop: Tommi Koivula
02 Mar 18 23:59:36 binkp[4928]: phone: -Unpublished-
02 Mar 18 23:59:36 binkp[4928]: flags: [115200] CM
02 Mar 18 23:59:36 binkp[4928]: mailer: binkd/1.1a-96/OS2 binkp/1.1
02 Mar 18 23:59:36 binkp[4928]: time: 00:59:35, unknown
02 Mar 18 23:59:36 binkp[4928]: we have: 0b mail, 0b files
02 Mar 18 23:59:36 binkp[4928]: options: Binkp/PWD/MB/MD5
02 Mar 18 23:59:36 binkp[4928]: total: 0:00:00 online, 0b sent, 0b received
02 Mar 18 23:59:36 binkp[4928]: session with 2:221/0 successful [ok]
02 Mar 18 23:59:36 binkp[4928]: exiting with rc=0
----- tommi ends -----

oh well still miss qico ipv6 patch :)

but atleast ipv6 works now here

time to make gentoo a router now, when all else fails

Tommi try emsi, confirm fails or works, port 60177 and 60179 is open now


Regards Benny

... there can only be one way of life, and it works :)

--- Msged/LNX 6.2.0 (Linux/4.9.76-gentoo-r1 (i686))
* Origin: I will always keep a PC running CPM 3.0 (1:261/38.20)

Hello Benny,

00:29 [2556] call to 2:230/0@fidonet
00:29 [2556] trying f0.n230.z2.binkp.net [2a06:4000:d:0:eeb2:d933:27fe:86ee]...
00:29 [2556] connected
00:29 [2556] outgoing session with f0.n230.z2.binkp.net:24554
[2a06:4000:d:0:eeb2:d933:2fe:86ee]
00:29 [2556] OPT CRAM-MD5-50ee780a5b7b16b2592dadd897c9ea40
00:29 [2556] Remote requests MD mode
00:29 [2556] SYS themultixpoint.junc.eu
00:29 [2556] ZYZ Benny Pedersen
00:29 [2556] LOC Jersore, Dk
00:29 [2556] NDL 300,CM,IBN
00:29 [2556] PHN -unpublished-
00:29 [2556] TIME Sat, 3 Mar 2018 00:29:54 +0100
00:29 [2556] VER qico-0.57.1xe/Linux-4.9.76-gentoo-r1-(i686) binkp/1.1
00:29 [2556] addr: 2:230/0@fidonet
00:29 [2556] addr: 2:230/38@fidonet
00:29 [2556] addr: 1:261/38.20@fidonet
00:29 [2556] addr: 39:14/0@AmigaNet (n/a or busy)
00:29 [2556] addr: 39:140/0@AmigaNet (n/a or busy)
00:29 [2556] addr: 39:140/127@AmigaNet (n/a or busy)
00:29 [2556] OPT MB
00:29 [2556] TRF 0 0
00:29 [2556] Remote has 0b of mail and 0b of files for us
00:29 [2556] done (to 2:230/0@fidonet, OK, S/R: 0/0 (0/0 bytes))
00:29 [2556] session closed, quitting...


Cheers, Michiel

--- GoldED+/W32-MSVC 1.1.5-b20170303
* Origin: he.net certified sage (2:280/5555)

On 2018 Mar 03 00:04:44, you wrote to All:

Hello All!

----- tommi begins -----
02 Mar 18 23:59:36 binkp[4928]: answering incoming call
02 Mar 18 23:59:36 binkp[4928]: remote is 0.0.0.0

wot iz 0.0.0.0???

)\/(ark

Always Mount a Scratch Monkey
Do you manage your own servers? If you are not running an IDS/IPS yer doin' it wrong...
... I'm so bored, I'm starting to miss my wife.
---
* Origin: (1:3634/12.73)

Hello mark!

02 Mar 2018 22:13, mark lewis wrote to Benny Pedersen:

----- tommi begins -----
02 Mar 18 23:59:36 binkp[4928]: remote is 0.0.0.0

wot iz 0.0.0.0???

its a invalid ipv6 connection (in qico), my qico cant be binded to ipv6 so its xinetd that have the right ipv6, in that case qico just says bogus ipv4

i dont know how to setup qico without xinetd


Regards Benny

... there can only be one way of life, and it works :)

--- Msged/LNX 6.2.0 (Linux/4.9.76-gentoo-r1 (i686))
* Origin: I will always keep a PC running CPM 3.0 (1:261/38.20)

Hello Michiel!

03 Mar 2018 00:30, Michiel van der Vlist wrote to Benny Pedersen:

MvdV> Hello Benny,

MvdV> 00:29 [2556] call to 2:230/0@fidonet
MvdV> 00:29 [2556] trying f0.n230.z2.binkp.net
MvdV> [2a06:4000:d:0:eeb2:d933:27fe:86ee]...
MvdV> 00:29 [2556] connected
MvdV> 00:29 [2556] outgoing session with f0.n230.z2.binkp.net:24554
MvdV> [2a06:4000:d:0:eeb2:d933:2fe:86ee]

super this ip is modem native with a ethernet cable to my gentoo box, my tp-link have now badly config that make ipv6 not working, i was have problem with incomming ipv5 via the tp-link, but outgoing ipv6 was ok on all lan ipv6, will try to reset it and start from fresh to make it better configured, its sadly one of them that cant have openwrt installed :/

i have another tp-link that have openwrt but missing wireless on 5Ghz, if i give op with it, i would need to search for a better router then

but it seems my pear bundled adsl now works stable :)



Regards Benny

... there can only be one way of life, and it works :)

--- Msged/LNX 6.2.0 (Linux/4.9.76-gentoo-r1 (i686))
* Origin: I will always keep a PC running CPM 3.0 (1:261/38.20)

03 Mar 18 00:04, Benny Pedersen wrote to All:

Tommi try emsi, confirm fails or works, port 60177 and 60179 is open now

I'm not sure if I can do that by IPv6, but with FrontDoor it works:

=== Cut ===
12.07.01 Calling Denmark, 2:230/0, themultixpoint.junc.eu 60177
12.07.02 CONNECT 57600/ARQ/TEL TO 212.237.177.55
12.07.23 themultixpoint.junc.eu, 2:230/0
12.07.23 AKA: 2:230/38, 1:261/38.20, 39:14/0, 39:140/0, 39:140/127
12.07.23 SysOp: Benny Pedersen
12.07.23 Using: qico 0.57.1xe/Linux-4.9.76-gentoo-r1 (i686)
12.07.23 RTime: 03 Mar 18, 11.07.21 (0100)
12.07.23 LTime: 03 Mar 18, 12.07.02 (0200)
12.07.23 Site: Jersore, Dk
12.07.23 Flags: CM,IBN
12.07.23 Phone: -unpublished-
12.07.23 sType: EMSI
12.07.23 Password protected mail session
12.07.23 Remote refused file requests (hold)
12.07.32 Mail transfer completed
12.07.32 To 2:230/0, 0.30, 0
12.07.32 No messages to send in this event
=== Cut ===

'Tommi

---
* Origin: 2001:470:1f15:cb0:f1d0:2:221:0 (2:221/0)

Hello Benny,

On Saturday March 03 2018 05:43, you wrote to me:

but it seems my pear bundled adsl now works stable :)

I take it you mean "pair bundled"?

BTW, there is an EMSI response at [2a06:4000:d:0:eeb2:d933:27fe:86ee] port 60177.


Cheers, Michiel

--- GoldED+/W32-MSVC 1.1.5-b20170303
* Origin: he.net certified sage (2:280/5555)

Hello Tommi!

03 Mar 2018 12:09, Tommi Koivula wrote to Benny Pedersen:

I'm not sure if I can do that by IPv6, but with FrontDoor it works:

----- Tommi begins -----
03 Mar 18 11:21:40 tcpip[27714]: answering incoming call
03 Mar 18 11:21:40 tcpip[27714]: remote is 88.114.128.109
03 Mar 18 11:21:40 tcpip[27714]: starting inbound EMSI session
03 Mar 18 11:21:40 tcpip[27714]: address: 2:221/6@fidonet
03 Mar 18 11:21:40 tcpip[27714]: system: COW, TCP/IP 1
03 Mar 18 11:21:40 tcpip[27714]: from: Lake Ylo, Finland
03 Mar 18 11:21:40 tcpip[27714]: sysop: Tommi Koivula
03 Mar 18 11:21:40 tcpip[27714]: phone: cow.mine.nu
03 Mar 18 11:21:40 tcpip[27714]: flags: [0] CM,MO,IFC,ITN:60177,IBN:24555
03 Mar 18 11:21:40 tcpip[27714]: mailer: Taurus 5.114.2013.19/Summer/Win32
03 Mar 18 11:21:40 tcpip[27714]: time: 12:21:40, unknown
03 Mar 18 11:21:40 tcpip[27714]: we have: 0b mail, 0b files
03 Mar 18 11:21:40 tcpip[27714]: options: Hydra/LST
03 Mar 18 11:21:40 tcpip[27714]: Hydra: Bi-directional mode session
03 Mar 18 11:21:40 tcpip[27714]: Hydra: Using link options 'XON,TLN,ASC,UUE,C32'
03 Mar 18 11:21:41 tcpip[27714]: rcvd: 00e60000.req, 7 bytes, 7 cps [ok]
03 Mar 18 11:21:41 tcpip[27714]: total: 0:00:01 online, 0b sent, 7b received
03 Mar 18 11:21:41 tcpip[27714]: session with 2:221/6 successful [ok]
03 Mar 18 11:21:41 tcpip[27714]: exiting with rc=0
----- Tommi ends -----

thanks for confirming it works


Regards Benny

... there can only be one way of life, and it works :)

--- Msged/LNX 6.2.0 (Linux/4.9.76-gentoo-r1 (i686))
* Origin: I will always keep a PC running CPM 3.0 (1:261/38.20)

03 Mar 18 22:02:58, you wrote to me:

03 Mar 2018 12:09, Tommi Koivula wrote to Benny Pedersen:

I'm not sure if I can do that by IPv6, but with FrontDoor it works:

----- Tommi begins -----
03 Mar 18 11:21:40 tcpip[27714]: answering incoming call
03 Mar 18 11:21:40 tcpip[27714]: remote is 88.114.128.109
03 Mar 18 11:21:40 tcpip[27714]: starting inbound EMSI session
03 Mar 18 11:21:40 tcpip[27714]: address: 2:221/6@fidonet
03 Mar 18 11:21:40 tcpip[27714]: system: COW, TCP/IP 1
03 Mar 18 11:21:40 tcpip[27714]: from: Lake Ylo, Finland
03 Mar 18 11:21:40 tcpip[27714]: sysop: Tommi Koivula

thanks for confirming it works

Yes, but IPv4. ;)

'Tommi

---
* Origin: 2001:470:1f15:cb0:f1d0:2:221:6 (2:221/6)

Hi Benny.

03 Mar 18 22:02:58, you wrote to me:

Hello Tommi!

03 Mar 2018 12:09, Tommi Koivula wrote to Benny Pedersen:

I'm not sure if I can do that by IPv6, but with FrontDoor it works:

----- Tommi begins -----
03 Mar 18 11:21:40 tcpip[27714]: answering incoming call
03 Mar 18 11:21:40 tcpip[27714]: remote is 88.114.128.109

And now the IPV6 EMSI call via privoxy:

=== Cut ===
09:09:05 Begin v5.114.2013.19/Winter
09:09:05 Running under: Windows 7 Enterprise x64 [version 6.1.7601] Service
09:09:05 Connect To 192.168.1.4 #60179
09:09:05 EMSI data sent
09:09:05 Nothing for them
09:09:05 EMSI data receive
09:09:05 Station : themultixpoint.junc.eu
09:09:05 Address : 2:230/0 2:230/38 1:261/38.20 39:14/0 39:140/0 39:140/
09:09:05 SysOp : Benny Pedersen from Jersore, Dk
09:09:05 Number : -unpublished-
09:09:05 Flags : 300,CM,IBN
09:09:05 Mailer : qico/0.57.1xe/Linux-4.9.76-gentoo-r1 (i686)
09:09:05 EMSI Addon : TZUTC [+0100]
09:09:05 EMSI Addon : OHFR 00:00-23:59 Never
09:09:05 Time : 04-Mar-2018 08:09:04
09:09:05 Non-password session
09:09:05 Handshake time - 0 seconds
09:09:05 Establishing Hydra transfer protocol
09:09:05 Hyd: Remote AppInfo ="qico,0.57.1xe Linux-4.9.76-gentoo-r1 (i686)"
09:09:05 Hyd: Remote HydraRev=01-Dec-1992, flags: XON,TLN,ASC,UUE,C32
09:09:05 SEND: End of batch
09:09:05 RECE: End of batch
09:09:05 Hydra transfer protocol complete
09:09:06 SEND: End of batch
09:09:06 RECE: End of batch
09:09:06 Hydra transfer protocol complete
09:09:06 Session completed successfully
09:09:06 Session traf: in: 0 (0b) out: 0 (0b) [891b/841b]
09:09:06 Session time: 00:00:01
09:09:06 End
=== Cut ===

The Privoxy log:

=== Cut ===
09:09:04.938 00000338 Connect: Accepted connection from 192.168.1.4 on socket 09:09:04.941 00000338 Request: benny-v6.rbb.fidonet.fi:60179/
09:09:04.943 00000338 Connect: to benny-v6.rbb.fidonet.fi:60179
09:09:05.021 00000338 Connect: Connected to benny-v6.rbb.fidonet.fi[2a01:7e00:e000:146::2]:60179.
09:09:05.023 00000338 Connect: Created new connection to benny-v6.rbb.fidonet.fi:60179 on socket
09:09:05.025 00000338 Connect: to benny-v6.rbb.fidonet.fi:60179 successful
09:09:06.391 00000338 Connect: Closing server socket 440 connected to benny-v6.rbb.fidonet.fi. Ke
=== Cut ===

Once again, it can be done, but why? :D

'Tommi

... he.net certified sage
---
* Origin: IPv6 Point at [2001:470:1f15:cb0:2:221:1:1] (2:221/1.1)

Hello Michiel!

03 Mar 2018 22:32, Michiel van der Vlist wrote to Benny Pedersen:

MvdV> I take it you mean "pair bundled"?

yes

MvdV> BTW, there is an EMSI response at
MvdV> [2a06:4000:d:0:eeb2:d933:27fe:86ee] port 60177.

good, i still work on ipv6 home router, so i cheat with linode ipv6 redirect to keep it work over 6to4, the above is when gentoo is client to modem without any router, just will need to have radvd setup now in new dlink router so all can be done in real lan ipv6

still work in progress for me


Regards Benny

... there can only be one way of life, and it works :)

--- Msged/LNX 6.2.0 (Linux/4.9.76-gentoo-r1 (i686))
* Origin: I will always keep a PC running CPM 3.0 (1:261/38.20)

Hello Tommi!

04 Mar 2018 08:24, Tommi Koivula wrote to Benny Pedersen:

Yes, but IPv4. ;)

i had brokken ipv6 at that call


Regards Benny

... there can only be one way of life, and it works :)

--- Msged/LNX 6.2.0 (Linux/4.9.76-gentoo-r1 (i686))
* Origin: I will always keep a PC running CPM 3.0 (1:261/38.20)

Hello Tommi!

04 Mar 2018 09:11, Tommi Koivula wrote to Benny Pedersen:

Once again, it can be done, but why? :D

Amiga still miss stable binkp, so as long i live i will support emsi


Regards Benny

... there can only be one way of life, and it works :)

--- Msged/LNX 6.2.0 (Linux/4.9.76-gentoo-r1 (i686))
* Origin: I will always keep a PC running CPM 3.0 (1:261/38.20)

Sunday March 04 2018 18:24, Benny Pedersen wrote to Tommi Koivula:

Once again, it can be done, but why? :D

Amiga still miss stable binkp, so as long i live i will support emsi

Amiga has IPv6?

'Tommi

---
* Origin: ------------------------------->> (2:221/360)

Hello Tommi!

04 Mar 2018 20:16, Tommi Koivula wrote to Benny Pedersen:

Once again, it can be done, but why? :D

Amiga still miss stable binkp, so as long i live i will support emsi

Amiga has IPv6?

depends on amiga kickstart version :)

if amitcp supports it in bsdsocket library


Regards Benny

... there can only be one way of life, and it works :)

--- Msged/LNX 6.2.0 (Linux/4.9.76-gentoo-r1 (i686))
* Origin: I will always keep a PC running CPM 3.0 (1:261/38.20)

On 2018-03-04 19:16, Tommi Koivula : Benny Pedersen wrote:

Sunday March 04 2018 18:24, Benny Pedersen wrote to Tommi Koivula:

 TK>> Once again, it can be done, but why? :D
 BP>
 BP> Amiga still miss stable binkp, so as long i live i will support emsi

Amiga has IPv6?

When running BSD and linux-m68k it does at least. ;)

AmigaOS probably not so much.

---
* Origin: nntp://news.fidonet.fi - Lake Ylo - Finland (2:221/6)

Hello Janne!

05 Mar 2018 12:35, Janne Johansson wrote to Tommi Koivula:

Amiga has IPv6?

When running BSD and linux-m68k it does at least. ;)

i have the redhat made by Jes Soerensen for m68k

AmigaOS probably not so much.

depends :-)


Regards Benny

... there can only be one way of life, and it works :)

--- Msged/LNX 6.2.0 (Linux/4.9.76-gentoo-r1 (i686))
* Origin: I will always keep a PC running CPM 3.0 (1:261/38.20)