Checking outbound routing on this message.
If anyone could paste back the path it would be super groovy.

Morgan
--- SBBSecho 3.14-Linux
* Origin: Halls of Valhalla -:- hovalbbs.com:2333 (1:218/840)

Hi, Morgan!

Checking outbound routing on this message.
If anyone could paste back the path it would be super groovy.
Morgan

Got it in Crimea. ;)

Have a nice carrot!
Brother Rabbit.

... A good companion not only listens attentively, but pours the drink on time --- Use "%UserProfile %Tearline text" to customize tearline.
* Origin: Fido by Telegram BBS from Stas Mishchenkov (2:460/256)

Hi Morgan,

On 2021-08-29 13:51:23, you wrote to All:

@MSGID: 4482.fidonet_fidotest@1:218/840 25913acd
@PID: Synchronet 3.19a-Linux master/02297d1a2 Jul 14 2021 GCC 9.3.0 @TZUTC: -0700
@TID: SBBSecho 3.14-Linux master/02297d1a2 Jul 14 2021 GCC 9.3.0
@BBSID: HOVAL
@CHRS: ASCII 1
@NOTE: SlyEdit 1.74 (2021-01-23) (DCT style)
Checking outbound routing on this message.
If anyone could paste back the path it would be super groovy.

Morgan
--- SBBSecho 3.14-Linux
* Origin: Halls of Valhalla -:- hovalbbs.com:2333 (1:218/840)
SEEN-BY: 103/705 124/5016 153/757 154/10 203/0 221/0 1 6 229/664 240/5832 SEEN-BY: 280/464 5003 5555 292/854 8125 301/1 310/31 335/364 341/66 SEEN-BY: 396/45 423/120 460/58 256 777 1124 5858 712/848 770/1 2452/250 SEEN-BY: 4500/1 4600/140 5020/1042 5054/30
@PATH: 221/6 460/58 280/464

There seems to be some seen-by and path line stripping going on! :-(

218/840 Is missing from both...


Bye, Wilfred.

--- FMail-lnx64 2.1.0.18-B20170815
* Origin: FMail development HQ (2:280/464)

On 29 Aug 2021 at 01:51p, Morgan Collins pondered and said...

@TZUTC: -0700
@MSGID: 4482.fidonet_fidotest@1:218/840 25913acd
@PID: Synchronet 3.19a-Linux master/02297d1a2 Jul 14 2021 GCC 9.3.0
@TID: SBBSecho 3.14-Linux master/02297d1a2 Jul 14 2021 GCC 9.3.0
@BBSID: HOVAL
@CHRS: ASCII 1
@NOTE: SlyEdit 1.74 (2021-01-23) (DCT style)
@PATH: 221/6 229/664 770/1
Checking outbound routing on this message.
If anyone could paste back the path it would be super groovy.

Morgan

--- Mystic BBS v1.12 A46 2020/08/26 (Linux/64)
* Origin: Agency BBS | Dunedin, New Zealand | agency.bbs.nz (3:770/100)

Hello Morgan,

@TZUTC: -0700
@MSGID: 4482.fidonet_fidotest@1:218/840 25913acd
@PID: Synchronet 3.19a-Linux master/02297d1a2 Jul 14 2021 GCC 9.3.0
@TID: SBBSecho 3.14-Linux master/02297d1a2 Jul 14 2021 GCC 9.3.0
@BBSID: HOVAL
@CHRS: ASCII 1
@NOTE: SlyEdit 1.74 (2021-01-23) (DCT style)
Checking outbound routing on this message.
If anyone could paste back the path it would be super groovy.

Morgan
--- SBBSecho 3.14-Linux
* Origin: Halls of Valhalla -:- hovalbbs.com:2333 (1:218/840)

SEEN-BY: 153/757 154/10 221/6 229/664
@PATH: 221/6

For some reason your node doesn't appear in the path and seen bys here.

Ttyl :-),
Al

--- GoldED+/LNX 1.1.5-b20180707
* Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)

zEEN-BY: 103/705 124/5016 153/757 154/10 203/0 221/0 1 6 229/426 664 zEEN-BY: 240/5832 280/464 5003 5555 292/854 8125 301/1 310/31 335/364 zEEN-BY: 341/66 396/45 423/120 460/58 256 777 1124 5858 712/848 770/1 zEEN-BY: 2452/250 4500/1 4600/140 5020/1042 5054/30
PATH: 221/6 460/58 280/464 292/854

This does not seem correct .... part of the path is stripped and I'm just guessing seen-bys too ...

\%/@rd

--- DB4 - Jul 07 2021
* Origin: Hou het veilig, hou vol. Het komt allemaal weer goed (2:292/854)

Hola Morgan!

29 Aug 21 13:51, Morgan Collins dijo a All:

@TZUTC: -0700
@MSGID: 4482.fidonet_fidotest@1:218/840 25913acd
@PID: Synchronet 3.19a-Linux master/02297d1a2 Jul 14 2021 GCC 9.3.0
@TID: SBBSecho 3.14-Linux master/02297d1a2 Jul 14 2021 GCC 9.3.0
@CHRS: ASCII 1
@NOTE: SlyEdit 1.74 (2021-01-23) (DCT style)
Checking outbound routing on this message.
If anyone could paste back the path it would be super groovy.

Morgan
--- SBBSecho 3.14-Linux
* Origin: Halls of Valhalla -:- hovalbbs.com:2333 (1:218/840)
SEEN-BY: 153/757 154/10 221/1 6 229/664 280/5555 301/1 335/364 341/66 460/58
SEEN-BY: 4500/1 5020/1042
@PATH: 221/6

Un saludo,
Angel Ripoll
aripoll @ zruspas.org

--- GoldED+/LNX 1.1.5-b20180707 + HPT 1.9 + Binkd 1.1 en Debian
* Origin: Synchronet - bbs.zruspas.org - Zruspa's BBS - (2:341/66)

Hi Morgan.

29 Aug 21 13:51, you wrote to All:

@TZUTC: -0700
@MSGID: 4482.fidonet_fidotest@1:218/840 25913acd
@PID: Synchronet 3.19a-Linux master/02297d1a2 Jul 14 2021 GCC 9.3.0
@TID: SBBSecho 3.14-Linux master/02297d1a2 Jul 14 2021 GCC 9.3.0
@BBSID: HOVAL
@CHRS: ASCII 1
@NOTE: SlyEdit 1.74 (2021-01-23) (DCT style)
Checking outbound routing on this message.
If anyone could paste back the path it would be super groovy.

Morgan
--- SBBSecho 3.14-Linux
* Origin: Halls of Valhalla -:- hovalbbs.com:2333 (1:218/840)
SEEN-BY: 221/6

There is no @PATH at all in your message. And the SEENBY-line is quite short.. :(

'Tommi

--- GoldED+/LNX 1.1.5-b20210627
* Origin: nntps://news.fidonet.fi (2:221/6)

On 29.8.2021 23.04, Wilfred van Velzen wrote:

Hi Morgan,

On 2021-08-29 13:51:23, you wrote to All:

@MSGID: 4482.fidonet_fidotest@1:218/840 25913acd
@PID: Synchronet 3.19a-Linux master/02297d1a2 Jul 14 2021 GCC 9.3.0 @TZUTC: -0700
@TID: SBBSecho 3.14-Linux master/02297d1a2 Jul 14 2021 GCC 9.3.0
@BBSID: HOVAL
@CHRS: ASCII 1
@NOTE: SlyEdit 1.74 (2021-01-23) (DCT style)
Checking outbound routing on this message.
If anyone could paste back the path it would be super groovy.

Morgan
--- SBBSecho 3.14-Linux
* Origin: Halls of Valhalla -:- hovalbbs.com:2333 (1:218/840)
SEEN-BY: 103/705 124/5016 153/757 154/10 203/0 221/0 1 6 229/664 240/5832
SEEN-BY: 280/464 5003 5555 292/854 8125 301/1 310/31 335/364 341/66 SEEN-BY: 396/45 423/120 460/58 256 777 1124 5858 712/848 770/1 2452/250 SEEN-BY: 4500/1 4600/140 5020/1042 5054/30
@PATH: 221/6 460/58 280/464

There seems to be some seen-by and path line stripping going on! :-(

218/840 Is missing from both...

The incoming PKT from the backup:

PktInfo/lnx 1.9.0-cur 2021-08-03

Packet header ============================================================================== Filename : 612bf34c.pkt
OrigAddr : 1:218/840.0
DestAddr : 2:221/6.0
AuxNet : 218
CapWord : 0x0001
DateCreation : Sun 2021-08-29 14:51:24
ProdCode : 12ff
ProdVersion : 3.14

Message header -+---------------------------------------------------------------------------- From : "Morgan Collins"
To : "All"
Subject : "routing test"
DateTime : "29 Aug 21 13:51:23"
Attr : 0x0100 -> Local
OrigAddr : 218/840
DestAddr : 221/6

Message text -+---------------------------------------------------------------------------- AREA:FIDOTEST
TZUTC: -0700
MSGID: 4482.fidonet_fidotest@1:218/840 25913acd
PID: Synchronet 3.19a-Linux master/02297d1a2 Jul 14 2021 GCC 9.3.0
TID: SBBSecho 3.14-Linux master/02297d1a2 Jul 14 2021 GCC 9.3.0
BBSID: HOVAL
CHRS: ASCII 1
NOTE: SlyEdit 1.74 (2021-01-23) (DCT style)
Checking outbound routing on this message.
If anyone could paste back the path it would be super groovy.

Morgan
--- SBBSecho 3.14-Linux
* Origin: Halls of Valhalla -:- hovalbbs.com:2333 (1:218/840) -+----------------------------------------------------------------------------

Morgan, you have something to fix.

'Tommi

---
* Origin: nntp://news.fidonet.fi (2:221/6.0)

Hi, Ward!

This does not seem correct .... part of the path is stripped and I'm just guessing seen-bys too ...

\%/@rd

It may be the result of zone gating.

Have a nice carrot!
Brother Rabbit.

... A good companion not only listens attentively, but pours the drink on time --- Use "%UserProfile %Tearline text" to customize tearline.
* Origin: Fido by Telegram BBS from Stas Mishchenkov (2:460/256)

Gnawrl,

This does not seem correct .... part of the path is stripped and I'm

just guessing seen-bys too ...

It may be the result of zone gating.

I don't recall path-lines being stripped ...

Happy munchings ...

\%/@rd

--- DB4 - Jul 07 2021
* Origin: Hou het veilig, hou vol. Het komt allemaal weer goed (2:292/854)

Hello Morgan.

29 Aug 21 13:51, you wrote to All:

@TZUTC: -0700
@MSGID: 4482.fidonet_fidotest@1:218/840 25913acd
@PID: Synchronet 3.19a-Linux master/02297d1a2 Jul 14 2021 GCC 9.3.0
@TID: SBBSecho 3.14-Linux master/02297d1a2 Jul 14 2021 GCC 9.3.0
@BBSID: HOVAL
@CHRS: ASCII 1
@NOTE: SlyEdit 1.74 (2021-01-23) (DCT style)
Checking outbound routing on this message.
If anyone could paste back the path it would be super groovy.

Morgan
--- SBBSecho 3.14-Linux
* Origin: Halls of Valhalla -:- hovalbbs.com:2333 (1:218/840)
SEEN-BY: 153/757 154/10 203/0 221/1 6 360 229/664 240/1120 1634 1895
8002
SEEN-BY: 240/8005 261/38 280/464 5003 5555 301/1 313/41 335/364 341/66 371/0
SEEN-BY: 371/52 380/5 382/147 423/81 460/58 2452/250 4500/1 5020/1042 @PATH: 221/6 1 240/1120 371/0

a Path from a Path

Daniel

... 5:19pm up 0 days, 3:10:43, load: 67 processes, 274 threads.
--- GoldED+/EMX 1.1.4.7
* Origin: Roon's BBS - Budapest, HUNGARY (2:371/52)

This does not seem correct .... part of the path is stripped and

I'm just guessing seen-bys too ...

It may be the result of zone gating.

I don't recall path-lines being stripped ...

Here is a second test message sent out via my original hub in Zone 1.

Morgan
--- SBBSecho 3.14-Linux
* Origin: Halls of Valhalla -:- hovalbbs.com:2333 (1:218/840)

On 30 Aug 2021, Morgan Collins said the following...

@TZUTC: -0700
@MSGID: 4494.fidonet_fidotest@1:218/840 25924d65
@REPLY: 2:292/854 102a3b26
@PID: Synchronet 3.19a-Linux master/02297d1a2 Jul 14 2021 GCC 9.3.0
@TID: SBBSecho 3.14-Linux master/02297d1a2 Jul 14 2021 GCC 9.3.0
@BBSID: HOVAL
@CHRS: ASCII 1
@NOTE: SlyEdit 1.74 (2021-01-23) (DCT style)
@SEEN-BY: 1/123 10/0 1 14/0 90/1 102/401 103/1 705 105/81 120/340 123/131 @SEEN-BY: 124/5016 154/10 203/0 218/0 1 410 700 720 802 830 840 850 860 870 880
@SEEN-BY: 221/0 226/30 227/114 229/200 424 426 428 452 550 664 700 1017 240/5411
@SEEN-BY: 240/5824 5832 5853 5890 249/206 307 317 400 261/38 280/464
5003 5555
@SEEN-BY: 282/1038 292/854 8125 301/1 310/31 317/3 320/219 322/757
342/200 201
@SEEN-BY: 396/45 423/120 460/58 633/280 712/848 770/1 2452/250
@PATH: 218/840 700 103/705 280/464 240/5832 229/426 342/200

This does not seem correct .... part of the path is stripped and

I'm just guessing seen-bys too ...

It may be the result of zone gating.

I don't recall path-lines being stripped ...

Here is a second test message sent out via my original hub in Zone 1.

Morgan

got it...

IB Joe
AKA Joe Schweier
SysOp of Joe's BBS
-=JoesBBS.com=-

--- Mystic BBS v1.12 A47 2021/01/16 (Raspberry Pi/32)
* Origin: JoesBBS.Com, Telnet:2323 SSH:2222 HTTP:80 (1:342/201)

Hello Morgan,

@TZUTC: -0700
@MSGID: 4494.fidonet_fidotest@1:218/840 25924d65
@REPLY: 2:292/854 102a3b26
@PID: Synchronet 3.19a-Linux master/02297d1a2 Jul 14 2021 GCC 9.3.0
@TID: SBBSecho 3.14-Linux master/02297d1a2 Jul 14 2021 GCC 9.3.0
@BBSID: HOVAL
@CHRS: ASCII 1
@NOTE: SlyEdit 1.74 (2021-01-23) (DCT style)

This does not seem correct .... part of the path is stripped

and I'm just guessing seen-bys too ...

It may be the result of zone gating.

I don't recall path-lines being stripped ...

Here is a second test message sent out via my original hub in Zone 1.

Morgan
--- SBBSecho 3.14-Linux
* Origin: Halls of Valhalla -:- hovalbbs.com:2333 (1:218/840)
SEEN-BY: 10/0 1 102/401 103/1 705 124/5016 153/757 154/10 203/0 218/0
1 410
SEEN-BY: 218/700 720 802 830 840 850 860 870 880 221/0 1 6 360 229/664 SEEN-BY: 240/1120 5832 261/38 280/464 5003 5555 292/854 8125 301/1 1 310/31
SEEN-BY: 335/364 341/66 396/45 423/81 120 460/58 712/848 770/1
2452/250 4500/1
SEEN-BY: 5020/1042
@PATH: 218/840 700 103/705 280/464 221/1 6

I see your node in the path and seen bys now. That looks good.

Ttyl :-),
Al

--- GoldED+/LNX 1.1.5-b20180707
* Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)

Here is a second test message sent out via my original hub in Zone
1.

@PATH: 218/840 700 103/705 280/464 221/1 6

I see your node in the path and seen bys now. That looks good.

So when I send to my Hub in Zone 1 (of which I am member) there are PATH the SEEN BY lines. But when I send to my Hub in Zone 2 there are no PATH and SEEN BY.

So perhaps this is a result of Zone gating as suggested previously? I think it's ok in these circumstances?

Morgan
--- SBBSecho 3.14-Linux
* Origin: Halls of Valhalla -:- hovalbbs.com:2333 (1:218/840)

Here is a second test message sent out via my original hub in Zone 1.

SEEN-BY: 10/0 1 102/401 103/1 705 124/5016 154/10 203/0 218/0 1 410 SEEN-BY: 218/700 720 802 830 840 850 860 870 880 221/0 229/426 240/5832 SEEN-BY: 261/38 280/464 5003 5555 292/854 8125 301/1 310/31 396/45
SEEN-BY: 423/120 460/58 712/848 770/1 2452/250
PATH: 218/840 700 103/705 280/464 292/854

Morgen,

Looks waaay better ...

\%/@rd

--- DB4 - Jul 07 2021
* Origin: Hou het veilig, hou vol. Het komt allemaal weer goed (2:292/854)

Hello Morgan,

I see your node in the path and seen bys now. That looks good.

So when I send to my Hub in Zone 1 (of which I am member) there are
PATH the SEEN BY lines. But when I send to my Hub in Zone 2 there are
no PATH and SEEN BY.

So perhaps this is a result of Zone gating as suggested previously? I think it's ok in these circumstances?

The first thing I would check is that it is not your own node removing the path and seen bys from mail heading to zone 2. In my sbbsecho.ini I use ZoneBlindThreshold = 4 and that seems to do what I want it to do.

The help for that option says we are breaking the rules of 3D addressing but that is what we want today when mail is moving between zones.

It is much better to leave path and seen by lines intact. If your link is the one removing them then ask your link if he has options to leave them intact. Most modern tossers can do that and and some older ones can't.

Ttyl :-),
Al

--- GoldED+/LNX 1.1.5-b20180707
* Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)

So when I send to my Hub in Zone 1 (of which I am member) there are
PATH the SEEN BY lines. But when I send to my Hub in Zone 2 there
are no PATH and SEEN BY.

The first thing I would check is that it is not your own node removing the path and seen bys from mail heading to zone 2. In my sbbsecho.ini I use ZoneBlindThreshold = 4 and that seems to do what I want it to do.

Okay. I have set that option in my sbbsecho.ini, and I'm now sending this message via my Zone 2 hub. Hopefully this resolves the missing PATH issue.

It is much better to leave path and seen by lines intact. If your link is the one removing them then ask your link if he has options to leave them intact. Most modern tossers can do that and and some older ones can't.

Ok, sounds good. I appreciate the assistance.

Morgan
--- SBBSecho 3.14-Linux
* Origin: Halls of Valhalla -:- hovalbbs.com:2333 (1:218/840)

Hello Morgan,

The first thing I would check is that it is not your own node
removing the path and seen bys from mail heading to zone 2. In my
sbbsecho.ini I use ZoneBlindThreshold = 4 and that seems to do
what I want it to do.

Okay. I have set that option in my sbbsecho.ini, and I'm now sending
this message via my Zone 2 hub. Hopefully this resolves the missing
PATH issue.

I don't see your node in the path or seen bys unfortunately.

It is much better to leave path and seen by lines intact. If your
link is the one removing them then ask your link if he has
options to leave them intact. Most modern tossers can do that and
and some older ones can't.

Ok, sounds good. I appreciate the assistance.

Glad to help, if I can.

I can't know for certain but I am almost certain that your node was in the path and seen bys when it left your node and went to zone 2.

Is it possible you can have a look at the packet going to zone 2 before it is sent and have a look to be sure.

If it was in there (as it should be) then your Z2 link is stripping them. I would ask that link if they can change that behaviour, or link with a different node in Z2. If that link is running Synchronet they will also want "ZoneBlindThreshold = 4" in their sbbsecho.ini.

Morgan
--- SBBSecho 3.14-Linux
* Origin: Halls of Valhalla -:- hovalbbs.com:2333 (1:218/840)
SEEN-BY: 153/757 154/10 221/6 229/664
@PATH: 221/6

Ttyl :-),
Al

--- GoldED+/LNX 1.1.5-b20180707
* Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)

Okay. I have set that option in my sbbsecho.ini, and I'm now
sending this message via my Zone 2 hub. Hopefully this resolves
the missing PATH issue.

I don't see your node in the path or seen bys unfortunately.

I made another attempt to save the setting using the GUI config. Can you check my Path on this message?

Thanks.

Morgan
--- SBBSecho 3.14-Linux
* Origin: Halls of Valhalla -:- hovalbbs.com:2333 (1:218/840)

Hello Morgan,

@TZUTC: -0700
@MSGID: 231.fidonet_fidotest@1:218/840 2592a677
@REPLY: 1:153/757 612d5d69
@PID: Synchronet 3.19a-Linux master/02297d1a2 Jul 14 2021 GCC 9.3.0
@TID: SBBSecho 3.14-Linux master/02297d1a2 Jul 14 2021 GCC 9.3.0
@BBSID: HOVAL
@CHRS: ASCII 1
@NOTE: SlyEdit 1.74 (2021-01-23) (DCT style)

Okay. I have set that option in my sbbsecho.ini, and I'm now
sending this message via my Zone 2 hub. Hopefully this resolves
the missing PATH issue.

I don't see your node in the path or seen bys unfortunately.

I made another attempt to save the setting using the GUI config. Can
you check my Path on this message?

Thanks.

Morgan
--- SBBSecho 3.14-Linux
* Origin: Halls of Valhalla -:- hovalbbs.com:2333 (1:218/840)
SEEN-BY: 153/757 154/10 218/840 221/6 229/664
@PATH: 218/840 221/6

That looks good.. :)

Ttyl :-),
Al

--- GoldED+/LNX 1.1.5-b20180707
* Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)

Hi Morgan.

30 Aug 21 16:53, you wrote to Alan Ianson:

I made another attempt to save the setting using the GUI config. Can you check
my Path on this message?

Thanks.

Morgan
--- SBBSecho 3.14-Linux
* Origin: Halls of Valhalla -:- hovalbbs.com:2333 (1:218/840)
SEEN-BY: 221/6 218/840
@PATH: 218/840

Now it is ok. :)

You may also send a message to "All" with the subject "test" to get a robot reply with kludges. ;)

'Tommi

--- GoldED+/LNX 1.1.5-b20210627
* Origin: nntps://news.fidonet.fi (2:221/6)