I have Fastecho working with ProBoard and it can send out netmail fine
to the destination. The issue is when I receive it, the mail stays in
my netmail folder as a *.MSG file. ProBoard can be configured to read
the *.MSG format but I cannot reply to them. I tried importing and
even with feutil import and I get:
Importing NetMail messages into secondary NetMail areas ...
0 NetMail message(s) imported ...
Even if I -FORCE it.
Does anyone have any ideas? I would like to have my incoming netmail
go directly into my JAM base.
14 Jul 23 23:02, Jason Bock wrote to All:
I have Fastecho working with ProBoard and it can send out netmailfine
to the destination. The issue is when I receive it, the mail staysin
my netmail folder as a *.MSG file. ProBoard can be configured toread
the *.MSG format but I cannot reply to them. I tried importing and even with feutil import and I get:
Importing NetMail messages into secondary NetMail areas ...
0 NetMail message(s) imported ...
Even if I -FORCE it.
Does anyone have any ideas? I would like to have my incoming netmail go directly into my JAM base.
'Feutil2.exe import' works fine here.
Are you sure your jam netmail area has been set correctly as "netmail"?
+================================= Edit Area ==============================
| Name: NETMAIL Group: A | Comment: FE Netmail (JAM)
| Origin: =========================>>>>
| Type: NetMail
| Storage: JAM Board:
| Path: D:\FASTECHO\NETMAIL\NETMAIL
'TommiI believe it is correctly setup. See below:
---
* Origin: ==========================>>> (2:221/1)
The above formatted a little sloppy, but it is readable. ;)
16 Jul 23 21:23, Jason Bock wrote to Tommi Koivula:
The above formatted a little sloppy, but it is readable. ;)
Yes. ;)
Then please check the feutil import exclude options. It may be that your FE is importing only netmail for bbs users.
FESetup System Data Export Import #############+------------------------+################
#############| Network addresses |################
#############| User names |################
#############| Miscellaneous |################
#############| Pathnames |################
#############| Filenames |################
#############| Parameters |################
#############| Advanced options |################
#############|+---- FEUTIL parameters -----+###########
#############|| PURGE - Messages 0 |###########
#############|| Days 0 |###########
#############|| Rcvd Days 0 |###########
#############|| Use arrival date No |###########
#############|| Autorenumber at 32767 |###########
#############|| Exclude Users No |###########
#############+| Exclude SysOps No |###########
##############| Include USERS.BBS No |###########
##############| Keep imported NetMail No |up 1.46 ###
##############| Kill grunged date Yes |###########
#### Copyright+----------------------------+urchhardt. ####################################################### #######################################################
'TommiTommi,
---
* Origin: =========================>>>> (2:221/1)
#############|| Exclude Users No |###########
#############+| Exclude SysOps No |###########
##############| Include USERS.BBS No |###########
##############| Keep imported NetMail No |up 1.46 ###
That is exactly how mine is setup. ;(
#############|+---- FEUTIL parameters -----+###########
#############|| PURGE - Messages 0 |###########
#############|| Days 0 |###########
#############|| Rcvd Days 0 |###########
#############|| Use arrival date No |###########
#############|| Autorenumber at 32767 |###########
#############|| Exclude Users No |###########
#############+| Exclude SysOps No |###########
##############| Include USERS.BBS No |###########
##############| Keep imported NetMail No |up 1.46 ###
##############| Kill grunged date Yes |###########
#### Copyright+----------------------------+urchhardt.
That is exactly how mine is setup. ;(
Hello Jason!I tried that suggestion. It still did not work. :(
Monday July 17 2023 01:51, Jason Bock wrote to Tommi Koivula:
#############|+---- FEUTIL parameters -----+###########
#############|| PURGE - Messages 0 |###########
#############|| Days 0 |###########
#############|| Rcvd Days 0 |###########
#############|| Use arrival date No |###########
#############|| Autorenumber at 32767 |###########
#############|| Exclude Users No |###########
#############+| Exclude SysOps No |###########
##############| Include USERS.BBS No |###########
##############| Keep imported NetMail No |up 1.46 ###
##############| Kill grunged date Yes |###########
#### Copyright+----------------------------+urchhardt.
That is exactly how mine is setup. ;(
FastEcho supports a QuickBBS or RA 2.x USERS.BBS for the netmail import function (when you toggle Include USERS.BBS to Yes.) However, You can
use an ASCII text file listing your users (1 user per line) & specify
that on the FEUTIL Import command line with the -Incl switch.
ie:
FEUTIL Import -Incl users.txt
For test purposes, I would create a text file with just your name in it, and see if it will import a NetMail addressed to you at the address you specified for your JAM netmail area.
ie:
FEUTIL Import -Incl bock.txt
where bock.txt contains:
Jason Bock
Hope this helps,
Andrew
---
* Origin: Bits & Bytes BBS * V.Everything! * 860/503-8857 (1:320/119)
14 Jul 23 23:02, Jason Bock wrote to All:
I have Fastecho working with ProBoard and it can send out netmailfine
to the destination. The issue is when I receive it, the mail staysin
my netmail folder as a *.MSG file. ProBoard can be configured toread
the *.MSG format but I cannot reply to them. I tried importing and even with feutil import and I get:
Importing NetMail messages into secondary NetMail areas ...
0 NetMail message(s) imported ...
Even if I -FORCE it.
Does anyone have any ideas? I would like to have my incoming netmail go directly into my JAM base.
'Feutil2.exe import' works fine here.
Are you sure your jam netmail area has been set correctly as "netmail"?
+================================= Edit Area ==============================
| Name: NETMAIL Group: A | Comment: FE Netmail (JAM)
| Origin: =========================>>>>
| Type: NetMail
| Storage: JAM Board:
| Path: D:\FASTECHO\NETMAIL\NETMAIL
'TommiI believe it is correctly setup. See below:
---
* Origin: ==========================>>> (2:221/1)
16 Jul 23 21:23, Jason Bock wrote to Tommi Koivula:
The above formatted a little sloppy, but it is readable. ;)
Yes. ;)
Then please check the feutil import exclude options. It may be that your FE is importing only netmail for bbs users.
FESetup System Data Export Import #############+------------------------+################
#############| Network addresses |################
#############| User names |################
#############| Miscellaneous |################
#############| Pathnames |################
#############| Filenames |################
#############| Parameters |################
#############| Advanced options |################
#############|+---- FEUTIL parameters -----+###########
#############|| PURGE - Messages 0 |###########
#############|| Days 0 |###########
#############|| Rcvd Days 0 |###########
#############|| Use arrival date No |###########
#############|| Autorenumber at 32767 |###########
#############|| Exclude Users No |###########
#############+| Exclude SysOps No |###########
##############| Include USERS.BBS No |###########
##############| Keep imported NetMail No |up 1.46 ###
##############| Kill grunged date Yes |###########
#### Copyright+----------------------------+urchhardt. ####################################################### #######################################################
'TommiTommi,
---
* Origin: =========================>>>> (2:221/1)
Hello Jason!I tried that suggestion. It still did not work. :(
Monday July 17 2023 01:51, Jason Bock wrote to Tommi Koivula:
#############|+---- FEUTIL parameters -----+###########
#############|| PURGE - Messages 0 |###########
#############|| Days 0 |###########
#############|| Rcvd Days 0 |###########
#############|| Use arrival date No |###########
#############|| Autorenumber at 32767 |###########
#############|| Exclude Users No |###########
#############+| Exclude SysOps No |###########
##############| Include USERS.BBS No |###########
##############| Keep imported NetMail No |up 1.46 ###
##############| Kill grunged date Yes |###########
#### Copyright+----------------------------+urchhardt.
That is exactly how mine is setup. ;(
FastEcho supports a QuickBBS or RA 2.x USERS.BBS for the netmail import function (when you toggle Include USERS.BBS to Yes.) However, You can
use an ASCII text file listing your users (1 user per line) & specify
that on the FEUTIL Import command line with the -Incl switch.
ie:
FEUTIL Import -Incl users.txt
For test purposes, I would create a text file with just your name in it, and see if it will import a NetMail addressed to you at the address you specified for your JAM netmail area.
ie:
FEUTIL Import -Incl bock.txt
where bock.txt contains:
Jason Bock
Hope this helps,
Andrew
---
* Origin: Bits & Bytes BBS * V.Everything! * 860/503-8857 (1:320/119)
Sysop: | Nelgin |
---|---|
Location: | Plano, TX |
Users: | 606 |
Nodes: | 10 (0 / 10) |
Uptime: | 126:56:26 |
Calls: | 9,607 |
Calls today: | 2 |
Files: | 16,058 |
Messages: | 1,061,877 |
Posted today: | 7 |