Ok.. I had some time today so I went through the nodelist segment. If your
name is listed you MUST contact me via email (otaku.txie@gmail.com)

I have no passwords/any info for the following nodes

39:902/501 - Wayne Smith (DEAD)
39:902/504 - Todd Zieman (DEAD)
39:902/506 - Ryan Fantus (DEAD)
39:902/512 - Ryan Fantus (DEAD)
39:902/520 - Danial Kelly (DEAD)
39:902/521 - Chris Costanzo (DEAD)

You have until Feb 15th to contact me. if I do not get confirmation by then I will remove your node from Amiganet.

I am not chasing people down, it's not my responsibility :D


Greetings, Dave Vandermeer (Night Stalker)

... At a store: In God we trust; all others pay cash.

--- MBSE BBS v1.0.7.3 (GNU/Linux-ARM)
* Origin: amynet 902 hub [binkp://idbbs.dlinkddns.com:24560] (39:902/0)

On 06 Feb 2019, Wilfred van Velzen said the following...

And how do you suppose they will read your threat, when they were only connected here through Carlos (if at all)? ;)

Well I have seen some of them in the last callers on my BBS and a couple
others that get Amiganet from me, so it was a shot in the dark

I have the email address of Ryan, and maybe others, which I will send
you in a n etmail.

I contacted Ryan earlier this morning, just waiting for a reply..

--- Mystic BBS v1.12 A42 2018/12/27 (Raspberry Pi/32)
* Origin: amynet 902 nc [binkp://idbbs.dlinkddns.com:24560] (39:902/0)

On 06 Feb 2019, Wilfred van Velzen said the following...

Ok, great! Thanks!

Np.. I was looking at MBSE's outbound and it's a bloody mess.. mail packets sitting here since September .. I'm going to get it sorted this weekend. I've moved the hub over to the newest alpha of Mystic because quite frankly it's much easier to monitor, the move should have been seamless to those that are already connected

--- FMail-lnx64 2.1.0.18-B20170815

Hey.. where can I grab FMail/Linux? I very much require it for a project I am working on.

--- Mystic BBS v1.12 A42 2018/12/27 (Raspberry Pi/32)
* Origin: amynet 902 nc [binkp://idbbs.dlinkddns.com:24560] (39:902/0)

Hi Dave,

On 2019-02-06 11:48:43, you wrote to me:

Np.. I was looking at MBSE's outbound and it's a bloody mess.. mail packets sitting here since September ..

That probably explains:

------------ Wed 2019-02-06, FMail-lnx64-2.1.0.18-Beta20170815
16:36:22.149 Toss
16:36:22.152 Received password "" from node 39:902/0, expected "*****" 16:36:22.152 Packet password security violation; packet file: /home/fido/inbound/5b915ac4.pkt is renamed with extension: '.wrong_password'

Which, after investigation, seems to be comming from mbse.

--- FMail-lnx64 2.1.0.18-B20170815

Hey.. where can I grab FMail/Linux? I very much require it for a project I am working on.

It's still sort of in Beta. (But working very stable here and at a node in Australia for a couple of years now)
So it's not directly available. You need to compile it from source yourself (if
your linux is to far removed from the kernel and libraries I'm using). And the
configuration program hasn't been converted to linux yet. So you need a (virtual) windows to do the configuration.
If you are still interested I'll give you the details. ;)
Or you can read back in the FMAIL_HELP area, where it was discussed in the past
(about 2 years ago I think)...

Bye, Wilfred.

--- FMail-lnx64 2.1.0.18-B20170815
* Origin: FMail development HQ (39:150/200)

On 06 Feb 2019, Wilfred van Velzen said the following...

That probably explains:

------------ Wed 2019-02-06, FMail-lnx64-2.1.0.18-Beta20170815 16:36:22.149 Toss
16:36:22.152 Received password "" from node 39:902/0, expected "*****" 16:36:22.152 Packet password security violation; packet file:

Actually I think that was me.. you are one of the few that uses a different password for everything and I might have mixxed up your packet password with your areafix/tic password .. netmail me so I can change it

--- Mystic BBS v1.12 A42 2018/12/27 (Raspberry Pi/32)
* Origin: amynet 902 nc [binkp://idbbs.dlinkddns.com:24560] (39:902/0)

On 06 Feb 2019, Wilfred van Velzen said the following...

It's still sort of in Beta. (But working very stable here and at a node
in Australia for a couple of years now)
So it's not directly available. You need to compile it from source yourself (if your linux is to far removed from the kernel and libraries I'm using). And the configuration program hasn't been converted to linux yet. So you need a (virtual) windows to do the configuration.
If you are still interested I'll give you the details. ;)

I have a linux development box so I dont think dependencies will be an issue. It has a full -dev install on it and I have a windows machine for the config
:)

--- Mystic BBS v1.12 A42 2018/12/27 (Raspberry Pi/32)
* Origin: amynet 902 nc [binkp://idbbs.dlinkddns.com:24560] (39:902/0)

Hi Dave,

On 2019-02-06 17:59:48, you wrote to me:

------------ Wed 2019-02-06, FMail-lnx64-2.1.0.18-Beta20170815
16:36:22.149 Toss
16:36:22.152 Received password "" from node 39:902/0, expected
"*****"

Actually I think that was me.. you are one of the few that uses a different password for everything and I might have mixxed up your
packet password with your areafix/tic password .. netmail me so I can change it

Above it says the Received password "", so it was empty. This was a pkt file with just one netmail. Other (compressed) pkt files with echomail, that came in
the same session were ok...

Bye, Wilfred.

--- FMail-lnx64 2.1.0.18-B20170815
* Origin: FMail development HQ (39:150/200)

Hi Dave,

On 2019-02-06 18:01:43, you wrote to me:

It's still sort of in Beta. (But working very stable here and at a
node in Australia for a couple of years now) So it's not directly
available. You need to compile it from source yourself (if your linux
is to far removed from the kernel and libraries I'm using). And the
configuration program hasn't been converted to linux yet. So you need
a (virtual) windows to do the configuration. If you are still
interested I'll give you the details. ;)

I have a linux development box so I dont think dependencies will be an issue. It has a full -dev install on it and I have a windows machine
for the config :)

Ok, you can try the executables in these files:

http://vlzn.nl/fmail/files/FMail-lnx32-2.1.0.17-Beta20170808.zip http://vlzn.nl/fmail/files/FMail-lnx32-2.1.0.18-Beta20170905.zip http://vlzn.nl/fmail/files/FTools-lnx32-static-2.1.0.17-Beta20170809.zip

If these run without complaining, your good to go. Otherwise we have to go the compilation route, which first involves getting the source with git from sourceforge...

https://sourceforge.net/p/fmail/code/ci/master/tree/

Then you also need the codeblocks ide. If that's not available directly for your distribution, you can get it here:

http://www.codeblocks.org/

BTW: Maybe we should take this to netmail, or a more apropriate area. Since you
are nolonger in fidonet FMAIL_HELP isn't an option, so maybe MAIL_AMY?

Bye, Wilfred.

--- FMail-lnx64 2.1.0.18-B20170815
* Origin: FMail development HQ (39:150/200)